11.22 AT+FRH Receive Data Using Hdlc Framing

MC55 AT Command Set

11.22 AT+FRH

mobile

11.22AT+FRH Receive Data Using HDLC Framing

Syntax

Write Command

AT+FRH=<mod>

Response(s)

CONNECT

If error related to ME functionality

ERROR

PIN ASC0 ASC1 MUX1 MUX2 MUX3

Reference(s)

TIA/EIA-578

Command Description

This command causes the TA to receive frames using the HDLC protocol and the modulation defined below. An ERROR response code results if this command is issued while the modem is on-hook.

Note

•Used for Fax Class 1 only

MC55_ATC_V01.05	Page 305 of 469	2/10/04
Confidential / Released

Page 305

Image 305

Siemens MC55 manual 11.22 AT+FRH Receive Data Using Hdlc Framing, AT+FRH=mod, TIA/EIA-578

Contents

MC55 MC55 AT Command Set Contents Atscfg AT+CSCSATSM20 AT+CMER AT+CLCK AtspicAtslck AT+CPWD AT+CRC AT+CRAT+CSNS Atscni AT+CGANS AT+CGACTAT+CGAUTO AT+CGDATA AT+FREV AT+FOPTAT+FRH AT+FRM Atsstgi AtsstaAtsstr AT+CPBR Atssync AtsctmATS3 ATS4 List of Tables List of Figures Scope of the document Introduction Related documents PIN Document conventionsQuick reference table Superscript notation for parameters and values Using parameters AT command syntaxAT+CXXX=? AT+CXXX? Combining AT commands on the same command line IRA Supported character sets Null AsciiBSP GSM alphabet tables and UCS2 character values Mobile Cscs 2 UCS2 and GSM data coding and conversion for SMS text modeGSM UCS2 Cscs GSM UCS2 Mobile Hardware flow control RTS/CTS flow control Flow ControlSoftware flow control XON/OFF flow control Communication between Customer Application and MC55 Unsolicited Result Code Presentation CSP Common PCN Handset Specification Cphs Errors and Messages Valuenum Configuration CommandsAT&Fvalue 1 AT&V responses AT&V Display current configurationAT&Vvalue Active Profile +CGSMS Active Profile+FCLASS AT&Wvalue ERROR/+CME Error err ATQn ATQ Set result code presentation mode Verbose and numeric result codes ATV Set result code format modeATVvalue If value=0 If value=1 Connect 4800/RLP Connect 2400/RLPConnect 9600/RLP Connect 14400/RLP ATXvalue ATX Set Connect result code format and call monitoring ATZvalue ATZ Set all current parameters to user defined profile AT+CFUN Set phone functionality OK Error +CME ErrorAT+CFUN=? +CFUN fun Funnum Rstnum +CMTI SM,5 AT+CFUN=0AT+CFUN? +CFUN AT+CFUN=1 AT+CFUN=1,1 URC Wake up the ME from Sleep modeFun=0 ATSMSO=? Atsmso Switch off mobile stationAtsmso Smso MS OFF OK AT+GCAP=? 10 AT+GCAP Request complete TA capabilities listAT+GCAP +GCAP name OK Error 11 AT+CMEE Report mobile equipment errorAT+CMEE=? AT+CMEE? AT+CMEE=2 Summary of CME Errors related to GSM Summary of GPRS-related CME Errors Summary of CMS Errors related to GSM No +CNMA ACK Expected Mobile AT+CSCS? 12 AT+CSCS Select TE character setAT+CSCS=? Also see chapter Supported character sets +CME Error operation temporary not allowed Atscfg Extended Configuration SettingATSCFG=? ATSCFG? Scfg PowerSaver/Mode9/Timeout, cfun9-timeout URC indication via Ring line ATSCFG=URC/Ringline, uri Cfun9-timeoutstr+CSCS HandOverStatusstr+CSCS AT+CSCS=UCS2 SCFGAudio/AMR,enabledSCFGAudio/AMR,0065006E00610062006C00650064 AT+CSCS=GSM ATSCFG? AT+CSCS=GSM ATSM20=? ATSM20 Set M20 compatibility modeATSM20? SM20CallMode, CmgwMode CmgwModenum CallModenum AT+CMER Mobile Equipment Event Reporting Status Control CommandsAT+CMER=? AT+CMER? +CIEV indDescr, indValue Mobile AT+CIND? AT+CIND Indicator controlAT+CIND=? Command Description Statenum Also refer Call Status InformationATSLCC, AT+CLCC or Atscni AT+CPIN=9999 +CIEV sounder,1 ATD0123456+CIEV call,1 +CIEV sounder,0 +CIEV call,0 No Carrier ATSIND=indDescr, Mode Atsind Extended Indicator ControlATSIND=? ATSIND? User Issued AT+CEER=? AT+CEER Extended error reportAT+CEER +CEER locationID, reason, ssRelease AT+CHLD=2 OK AT+CHLD=3 +CEER 35,0,43 Cause Location ID for the extended error reportAT+clck=oi,1,0000,3 +CME Error incorrect password GSM release cause for L3 Radio Resource RR GSM release cause for Mobility Management MM Siemens release cause for L3 Radio Resource RR GSM release cause for L3 Call Control CC Siemens release cause for L3 Mobility Management MM Mobile Siemens release cause for L3 Call Control CC GSM Release cause for Supplementary Service Call Siemens release cause for L3 Advice of Charge AOC Mobile Siemens release cause for Session Management SM Siemens release cause for Embedded Netcore GSM cause for L3 Protocol module or other local causeSiemens release cause for Gprs API ATS18? ATS18 Extended call release reportATS18=n +CAUSE locationID, reason Connect 9600/RLP Busy AT+CPAS=? AT+CPAS Mobile equipment activity statusAT+CPAS +CPAS pas AT+WS46=? AT+WS46 Select wireless networkAT+WS46? AT+WS46=n Error Serial Interface Control CommandsAT\Q Flowcontrol AT\Qn AT&Cvalue AT&C Set circuit Data Carrier Detect DCD function mode AT&Dvalue AT&D Set circuit Data Terminal Ready DTR function mode AT&Svalue AT&S Set circuit Data Set Ready DSR function mode ATEvalue ATE Enable command echo AT+ILRR? AT+ILRR Set TE-TA local rate reportingAT+ILRR=? Ratenum AT+IPR=? AT+IPR Set fixed local rateAT+IPR? +IPR rate Chronized after restarting the GSM engine see chapter Autobauding +CMUX mode AT+CMUX Enter multiplex modeAT+CMUX=? AT+CMUX? +++ Restrictions on Multiplex modeSubsetnum ATS7 ATS6ATS8 ATS10 AT+CFUN Second serial interface ASC1 AT+CPIN Enter PIN Security CommandsAT+CPIN=? AT+CPIN? Codetext PinstrNew pintext PH-SP PUK What to do if PIN or password authentication fails?PH-C PIN PH-C PUK Mobile AT+CPIN2=? AT+CPIN2 Enter PIN2AT+CPIN2? +CPIN2 code AT+CPWD=P2,0000,8888 New pinstrAT+CPIN2? +CPIN2 SIM PUK2 AT+CPIN2=12345678,8888 AT+CPBS=FD +CME ErrorAT+CPBW=2,+493012345678,145,Charly AT+CPIN2=8888 AT+CPBW=2,+493012345678,145,Charly ATSPIC=? Atspic Display PIN counterATSPIC? Atspic Facilitystr Counternum +CPIN SIM PUK +CPIN SIM PIN At+cpin=9999 OK at+cpin? At+cpin=4714 +CME Error incorrect password Atspic Spic AT+CLCK=? AT+CLCK=facility, mode, password, classAT+CLCK Facility lock Phone security locks set by client or factory Factory defined SIM locks Statusnum PasswordstrClassnum SMS AT+CPIN? +CPIN SIM PIN AT+CLCK=SC,2 AT+CPIN? +CPIN PH-SIM PIN AT+CPIN=1111AT+CPIN=3333 AT+CLCK=PS,0,3333 ATSLCK=? ATSLCK=facility, mode, password, classAtslck Facility lock +CPWDlist of supported facility, password length AT+CPWD Change PasswordAT+CPWD=facility, old password, new password +CME Error 16 +CME Error incorrect password Password length 4 digits Password length 4 to 8 digits New passwordstr Password lengthnumOld passwordstr AT+CPWD=PS,1111,2222 AT+CPWD=AO,0000,3333AT+CPWD=PS,12345678,1111 AT+CPWD=PS,12345678 SPWDlist of supported facility, password length Atspwd Change PasswordATSPWD=facility, old password, new password ATSPWD=? ATI Display product identification information Identification CommandsATI ATIvalue AT+CGMI AT+CGMI Request manufacturer identificationAT+CGMI=? AT+GMI AT+GMI Request manufacturer identificationAT+GMI=? AT+CGMM AT+CGMM Request model identificationAT+CGMM=? AT+GMM AT+GMM Request TA model identificationAT+GMM=? AT+CGMR=? AT+CGMR Request revision identification of software statusAT+CGMR Xx.yystr Xx.yytext AT+GMR=?AT+GMR AT+CGSN AT+CGSN=? AT+GSN AT+GSN=? AT+CIMI=? 10 AT+CIMI Request international mobile subscriber identityAT+CIMI Imsi Call Status Information Call related Commands Call Status Information ATA Answer a call Connect text TA switches to data modeATA Textstr Connect text ATDnmgsmNo Dialtone Mgsmstr ATD03022222222 Memstr ATDmemn Originate call to phone number in memoryATDmemnmgsm ATDLD9 AT+CPBR=1,xxATDSM15 Memory Mobile ATDstrmgsm Sponding field Mobile ATDIn Atdi Mobile originated call to dialable Isdn number n Atdl Atdl Redial last telephone number used ATHn ATH Disconnect existing connection AT+CHUP 10 AT+CHUP Hang up callAT+CHUP=? ATS0=n CallATS0? Mobile ATS6=n 12 ATS6 Set pause before blind dialingATS6? ATS7=n ATS7? ATS8=n ATS8? ATS10=n CarrierATS10? ATP ATP Select pulse dialing ATOn ATO Switch from command mode to data mode / PPP online mode 18 +++ Switch from data mode to command mode ATT ATT Select tone dialing AT+CBST=? 20 AT+CBST Select bearer service typeAT+CBST? +CBST speed, name, ce 14400 bps AT+CRLP=? Parent data callAT+CRLP? +CRLP iws, mws, T1, N2, verx Verxnum AT+CLCC=? 22 AT+CLCC List current calls of MEAT+CLCC +CLCC idx, dir, stat, mode, mpty, number, type, alpha Typenum MptynumNumberstr Mobile ATSLCC? ATSLCC=?Slcc n Atslcc ATSLCC=n Mobile originated call MOC Mobile terminated call MTC Alphastr Traffic channel assignednum Slcc Ring +CR mode 24 AT+CR Service reporting controlAT+CR=? AT+CR? Gprs ServstrREL Async AT+CRC=? +CRC modeAT+CRC? AT+CRC=mode Voice TypestrFAX 26 AT+CSNS Single Numbering Scheme +CSNS modeAT+CSNS=? AT+CSNS? Mobile ATSCNI=? Atscni List Call Number InformationAtscni Scni id1,cs,number,type Scni id2,cs,number,type String type phone number in format specified by type ATSLCD=? Atslcd Display Last Call DurationAtslcd Slcd time ATSTCD=? Atstcd Display Total Call DurationAtstcd Stcd time AT+COPN Read operator names Network Service CommandsAT+COPN=? AT+COPN AT+COPS=? AT+COPS Operator selectionAT+COPS? +COPSmode, format, oper Oper&V Operator Statnum Status Mobile AT+CREG=? AT+CREG Network registrationAT+CREG? +CREG n, stat, lac, ci =2 +CREGstat,lac,ci AT+CREG=2 LacstrAT+COPS=0 +CREG 1,0145,291A AT+CSQ=? AT+CSQ Signal qualityAT+CSQ +CSQ rssi,ber Mobile Atsmonc Cell Monitoring CME ErrorATSMONC=? Atsmonc Channnum CellnumBSICnum ATMONI=? Atmoni Monitor idle mode and dedicated modeAtmoni ATMONI=period Serving Cell Dedicated channel Chann rs DBm Atmoni responsesPlmn Chann TS timAdv PWR DBm Q ChMod PWR Service states Mobile ATMONP=? Atmonp Monitor neighbour cellsAtmonp ATMONP=period Chann DBm Atmonp responsesMCC MNC BCC 100 ATSMONG=? Atsmong Gprs MonitorAtsmong ATSMONG=table , period Gprs Monitor Atsmong Cell Info TableBcch Pbcch PAT MCC MNC NOM RAC # Cell # ATSALS=? Atsals Alternate Line ServiceATSALS? Sals view, line Sals ATSALS=1,1 ATSHOM=? Atshom Display HomezoneAtshom Shom homezonestate ATSPLM=? Atsplm Read the Plmn listAtsplm SPLMnumeric, long alpha ATSPLR=? Atsplr Read entry from the preferred operators listATSPLR=index1, index2 Splr index1oper Splr index2oper Operstr ATSPLW=? Atsplw Write an entry to the preferred operators listATSPLW=index, oper Indexnum AT+CACM Accumulated call meter ACM reset or query Supplementary Service CommandsAT+CACM=? AT+CACM? Passwdstr Acmstr ATSACM=? Atsacm Advice of charge and query of ACM and ACMmaxAtsacm Sacm n, acm, acmMax Ccmstr Ffffff AT+CAMM=? AT+CAMM Accumulated call meter maximum ACMmax set or queryAT+CAMM? +CAMM acmmax MC55ATCV01.05 217 10/04 Confidential / Released AT+CAOC=? AT+CAOC Advice of Charge informationAT+CAOC? AT+CAOC Query CCM value AT+CCUG=? AT+CCUG Closed User Group+CCUGn, index, info AT+CCUG=n, index, info Infonum AT+CCFC=? AT+CCFC=reason, mode , number, type, class, timeAT+CCFC Call forwarding number and conditions control Not reachable At+ccfc=0,3,+493012345678,145 Timenum At+ccfc=0,0 At+ccfc=4,2 +CME error operation not supported at+ccfc=5,2At+ccfc=0,4 At+ccfc=0,2 +CCFC 0,1 +CCFC 0,2 +CCFC 0,4 AT+CCWA=? AT+CCWA Call WaitingAT+CCWA? AT+CCWA=n, mode, class Scwa +CCWA calling number, type of number, class, , CLI validity CLI validitynum Calling numberstrType of numbernum At+ccwa=,1 At+ccwa=1At+ccwa=,2 At+ccwa=1,1 AT+CHLD=? AT+CHLD Call Hold and MultipartyAT+CHLD=n Udub At+chld=2 At+ccwa=1,1,1+CCWA +491791292364,145,32,,0 At+clcc +CLCC 1,0,0,0,0,03038639268,129 Ring ATAAt+clcc AT+CLIP=? AT+CLIP Calling line identification presentationAT+CLIP? +CLIP number, type, , , , CLI validity Suppress unsolicited result codes AT+CLIR=? 10 AT+CLIR Calling line identification restrictionAT+CLIR? +CLIRn, m Mnum AT+CPUC=? 11 AT+CPUC Price per unit and currency tableAT+CPUC? +CPUC currency, ppu Ppustr AT+CPUC=EUR,0.10 +CME Error SIM PIN2 requiredAT+CPUC=EUR,0.10,8888 AT+CPUC=EUR,0.10 AT+CSSN=? 12 AT+CSSN Supplementary service notificationsAT+CSSN? +CSSI code Code 2num Code 1num AT+CUSD=? 13 AT+CUSD Supplementary service notificationsAT+CUSD? AT+CUSD=n, str, dcs Dcsnum Strstr 10.1 AT+CGACT PDP context activate or deactivate Gprs CommandsAT+CGACT=? AT+CGACT? Cidnum AT+CGANS=response, L2P, cid AT+CGANS=?Responsenum L2Pstr Mobile AT+CGATT=? 10.3 AT+CGATT Gprs attach or detachAT+CGATT? +CGATT state State=1 AT+CGAUTO=? AT+CGANScommandAT+CGAUTO? +CGAUTO n Below AT+CGDATA=? Connect No Carrier Error +CME Error10.5 AT+CGDATA Enter data state Parameter Description AT+CGDCONT=? 10.6 AT+CGDCONT Define PDP ContextAT+CGDCONT? +CGDCONT cid, PDPtype, APN, PDPaddr, dcomp, hcomp APNstr PDPtypestrPDPaddrstr Dcompnum 10.7 AT+CGPADDR Show PDP address +CGPADDR OK Error +CME ErrorAT+CGPADDR=? +CGPADDR cid, PDPaddress AT+CGQMIN=cid, precedence, delay, reliability, peak, mean +CGQMIN cid, precedence, delay, reliability, peak, meanAT+CGQMIN=? AT+CGQMIN? Precedencenum Precedence class Delaynum Delay classCid Meannum Reliabilitynum Reliability classPeaknum AT+CGQMIN= AT+CGQMIN? AT+CGQMIN=1,0 AT+CGDCONT=1,ip +CGQREQ cid, precedence, delay, reliability, peak, mean 10.9 AT+CGQREQ Quality of Service Profile RequestedAT+CGQREQ=cid, precedence, delay, reliability, peak, mean AT+CGQREQ=? Reliabilitynum Peaknum AT+CGQREQ= AT+CGQREQ? AT+CGQREQ=1,0 AT+CGREG=? 10.10 AT+CGREG Gprs network registration statusAT+CGREG? +CGREG n, stat Stat=1 or stat=5 +CGSMS service 10.11 AT+CGSMS Select service for MO SMS messagesAT+CGSMS=? AT+CGSMS? Circuit switched ATSGAUTH? Atsgauth Set type of authentication for PPP connectionATSGAUTH=? ATSGCONF=? Atsgconf Configuration of Gprs related ParametersATSGCONF? Sgconf llcpdulength, class Mobile Connect No Carrier ATD*99* calledaddress* L2P* cid # 10.15 ATD*99# Request Gprs serviceCalledaddressstr PPP Cidnum ATD*98* cid # 10.16 ATD*98# Request Gprs IP service ATH 10.18 ATS0 Mobile AT+CGDCONT=1,IP Using Gprs AT commands ExamplesAT+CGDCONT=2,IP, internet.t-d1.gprs AT+CGDCONT=1 AT+CGQREQ=1 AT+CGQREQ=1,2AT+CGACT=1,2 AT+CGACT= By AT+CGDCONT Using the Gprs dial command ATDConnect FAX parameters FAX CommandsAT+FCLASS Parameter EIA/TIA-578-A Modnum 40 ms AT+FBADLIN? 11.2 AT+FBADLIN Bad Line ThresholdBadlin AT+FBADLIN=badlin AT+FBADMUL? 11.3 AT+FBADMUL Error Threshold MultiplierBadmul AT+FBADMUL=badmul AT+FBOR=? 11.4 AT+FBOR Query data bit orderAT+FBOR? Bor AT+FCIG=id AT+FCIG=?AT+FCIG? AT+FCLASS? AT+FCLASS=?AT+FCLASS=n EIA/TIA-592-A Mobile AT+FCQ=? 11.7 AT+FCQ Copy Quality CheckingAT+FCQ? AT+FCQ=cq AT+FCR=cr 11.8 AT+FCR Capability to receive AT+FDCC=? 11.9 AT+FDCC Query or set capabilitiesAT+FDCC? Vr, br, wd, ln, df, ec, bf, st AT+FDFFC=? 11.10 AT+FDFFC Data Compression Format ConversionAT+FDFFC? AT+FDFFC=df AT+FDIS=? 11.11 AT+FDIS Query or set session parametersAT+FDIS? AT+FDIS=vr, br, wd, ln, df, ec, bf, st AT+FDR 11.12 AT+FDR Begin or continue phase C data receptionConnect or If error related to ME functionality AT+FDT=df, vr, wd, ln 11.13 AT+FDT Data TransmissionAT+FDT Ppmnum 11.14 AT+FET End a page or documentAT+FET=ppm AT+FK 11.15 AT+FK Kill operation, orderly FAX abort AT+FLID? AT+FLID=?Lid AT+FLID=lid Gipsy Soft Protocolstack 11.17 AT+FMDL Identify Product ModelAT+FMDL? Siemens 11.18 AT+FMFR Request Manufacturer IdentificationAT+FMFR? Optnum 11.19 AT+FOPT Set bit order independentlyAT+FOPT=opt AT+FPHCTO? 11.20 AT+FPHCTO DTE Phase C Response TimeoutTout AT+FPHCTO=tout V2.550 11.21 AT+FREV Identify Product RevisionAT+FREV? TIA/EIA-578 11.22 AT+FRH Receive Data Using Hdlc FramingAT+FRH=mod AT+FRM=mod 11.23 AT+FRM Receive DataAT+FRM=? AT+FRS=time 11.24 AT+FRS Receive Silence AT+FTH=mod 11.25 AT+FTH Transmit Data Using Hdlc Framing AT+FTM=mod 11.26 AT+FTM Transmit DataAT+FTM=? AT+FTS=time 11.27 AT+FTS Stop Transmission and Wait AT+FVRFC=? 11.28 AT+FVRFC Vertical resolution format conversionAT+FVRFC? Vrfc SMS parameters Short Message Service SMS CommandsAckpdunum Cdatanum Mem1str LengthnumMem2str Mem3str Pagesnum PagenumPdunum Sctsnum Todanum StatstrTooanum Toranum Error +CMS Error 12.2 AT+CMGC Send an SMS commandAT+CMGC=? +CMGC mr, scts 12.3 AT+CMGD Delete SMS message OK Error +CMS ErrorAT+CMGD=? AT+CMGD=index 12.4 AT+CMGF Select SMS message format +CMGF modeAT+CMGF=? AT+CMGF? AT+CMGL 12.5 AT+CMGL List SMS messages from preferred storeAT+CMGL=? Mobile AT+CMGR=? 12.6 AT+CMGR Read SMS messages+CMGR stat, fo, mr, ra, tora , scts, dt, st data +CMGR stat, fo, ct , pid, mn, da, toda, length data Mobile AT+CMGS=? 12.7 AT+CMGS Send SMS message+CMGS mr, scts +CMGS mr, ackpdu Mobile AT+CMGW=? 12.8 AT+CMGW Write SMS messages to memoryAT+CMGW +CMGW index Command Description AT+CMSS=? 12.9 AT+CMSS Send SMS messages from storageAT+CMSS=index , da, toda +CMSS mr, scts AT+CNMA=n AT+CNMA=?AT+CNMA Mobile AT+CNMI? 12.11 AT+CNMI New SMS message indicationsAT+CNMI=? +CBM sn, mid, dcs, page, pagesCRLFdata +CBM lengthCRLFpdu+CDS lengthCRLFpdu +CDS fo, mr, ra, tora, scts, dt, st Ward them directly to the TE Mobile 12.12 AT+CPMS Preferred SMS message storage OK Error Error +CMS ErrorAT+CPMS=? AT+CPMS? Used3num Used2numTotal1num Total2num Mobile AT+CSCA=? 12.13 AT+CSCA SMS service centre addressAT+CSCA? +CSCA sca, tosca AT+CSCB=? 12.14 AT+CSCB Select Cell Broadcast Message IndicationAT+CSCB? +CSCB mode, mids, dcss Dcssstr AT+CSDH=? 12.15 AT+CSDH Show SMS text mode parametersAT+CSDH? Not show pid , mn , da , toda , length or cdata AT+CSMP=? 12.16 AT+CSMP Set SMS text mode parametersAT+CSMP? +CSMPfo, vp/ scts, pid, dcs Pidnum AT+CSMS? 12.17 AT+CSMS Select Message ServiceAT+CSMS=? Mobile Terminated Messages Type not supported Type supported Atslms Atslms List SMS Memory StorageATSLMS=? Used2num ATSMGL=stat ATSMGL=?Atsmgl Error CME Error Smgo n, modeATSMGO=? ATSMGO? SMS overflow presentation mode ATSMGR=? Atsmgr Read SMS message without setting status to REC ReadSmgr ATSMGR=index ATSSCONF=? Atssconf SMS ConfigurationATSSCONF? SSCONFra Mobile ATSSDA=? Atssda Set SMS Display AvailabilityATSSDA? SSDAda Danum ATSSMSS=? Atssmss Set Short Message Storage SequenceATSSMSS? Ssmss seq 13.1 AT+CRSM Restricted SIM Access SIM related CommandsAT+CRSM=command, fileID, P1, P2, P3, data AT+CRSM=? Datastr FileIDnumSw1num Sw2num ATSCKS=? Atscks Query SIM and Chip Card Holder StatusATSCKS? Scks mode, SimStatus Scks SimStatusnum&VATSCKS=1 ATSCID=? Atscid Display SIM card identification numberAtscid Scid cid AT+CXXCID=? 13.4 AT+CXXCID Display card IDAT+CXXCID +CXXCID cid Atssta SAT Interface Activation SIM Application Toolkit SAT CommandsATSSTA=? ATSSTA? SatProfilestr AlphabetnumAllowedInstancenum Sstn cmdType Sstn SAT NotificationSstn cmdTerminateValue Sstn CmdTerminateValuenum CmdTypenum ATSSTGI=? Atsstgi SAT Get InformationATSSTGI? Sstgi state, cmdType Related Proactive Command ATSSTR=? Atsstr SAT ResponseATSSTR? Sstr state, cmdType InputStringstr InputNumbernum Sort Order for Phonebooks Phonebook Commands AT+CPBR=? 15.2 AT+CPBR Read from Phonebook+CPBR 1-maxloc,nlength, tlength AT+CPBR=location1, location2 Location2num Location1numTypenum Address type Maxlocnum +CPBR2,+777777,145,Bill +CPBR3,+888888,145,Arthur Tlengthnum AT+CPBS=? 15.3 AT+CPBS Select phonebook memory storageAT+CPBS? +CPBS storage, used, total Totalnum StoragestrUsednum AT+CPBW=? 15.4 AT+CPBW Write into Phonebook+CPBW 1-maxloc,nlength, list of supported types, tlength AT+CPBW=location, number, type, text Locationnum AT+CPBW=1 AT+CPBW=,+431234567,145,international ATSPBC=? Atspbc Search the first entry in the sorted telephone bookATSPBC=schar Spbc index Scharstr+CSCS ATSPBD=storage Atspbd Purge phonebook memory storageATSPBD=? Storagestr ATSPBG=? Atspbg Read current Phonebook entriesSpbg 1-used,nlength, tlength ATSPBG=index1, index2, RealLocReq RealLocReqnum ATSPBG=1,33 Spbg 1-33,20,17 +CPBR 27,+999999,145,Arthur ATSPBG=1,33,1AT+CPBR=27 ATSPBS=value, RealLocReq Atspbs Step through the selected phonebook alphabeticallyATSPBS=? Index-c=index-b+1 Counter valueIndex-b=index-a+1 Internal-counternum +CPBR27,+999999,145,Arthur At&f Atsdld Atsdld Delete the last number redial memoryATSDLD=? Audio programming model Audio Commands Valnum ATL Set monitor speaker loudnessATLval ATMval ATM Set monitor speaker mode AT+CLVL? 16.4 AT+CLVL Loudspeaker volume levelAT+CLVL=? AT+CFUN=1,1 AT+CMUT? 16.5 AT+CMUT Mute controlAT+CMUT=? AT+VTD=? 16.6 AT+VTD Tone durationAT+VTD? Duration AT+VTS=? 16.7 AT+VTS Dtmf and tone generationAT+VTS=dtmfString AT+VTS=dtmf, duration Mobile ATSAIC=? Atsaic Audio Interface ConfigurationATSAIC? Saic io, mic, ep Microphone selection ATSNFA? Atsnfa Set or query of microphone attenuationATSNFA=? OK atsnfa? Snfa OK atsnfa? Snfa OK atsnfs=4 OK atsnfa=1 OK atsnfi? Snfi 5,1 Atsnfd Atsnfd Set audio parameters to manufacturer default valuesATSNFD=? ATSNFI=? Atsnfi Set microphone path parametersATSNFI? Snfi inBbcGain, inCalibrate Mobile Snfm MicSwitch, MicVccState Atsnfm Set microphone audio path and power supplyATSNFM=MicSwitch , MicVccCtl ATSNFM=? MicVccStatenum MicSwitchnumMicVccCtlnum ATSNFO=? Atsnfo Set audio output = loudspeaker path parameterATSNFO? OutBbcGainnumSNFW OutStepnum OutCalibratenumSNFW ATSNFPT=? Atsnfpt Set progress tonesATSNFPT? Snfpt pt ATSNFS=? Atsnfs Select audio hardware setATSNFS? Snfs audMode Atsnfd restores audMode ATSNFS=2 ATSAIC? ATSNFS=4 ATSAIC?Atsnfw ATSNFS=4 ATSAIC=2,1,1 ATSNFTTY=? Atsnftty Switch audio path to TTY/CTM modeATSNFTTY? Snftty state Audio path is in normal speech mode ATSNFV=? Atsnfv Set loudspeaker volumeATSNFV? Snfv outStep MC55ATCV01.05 420 10/04 Confidential / Released ATSNFW=? Atsnfw Write audio setting in non-volatile store ATSRTC=? Atsrtc Ring tone configurationATSRTC? Atsrtc Volumenum Mobile 17.1 AT+CALA Set alarm time Hardware related CommandsAT+CALA=? AT+CALA? +CALA text Sysstart Alarm Mode +CALA text +CALA Good Morning AT+CALA=04/05/31,093000,0,0,Good Morning Sysstart Alarm Mode Summary of AT commands available in Alarm modeAT+CALA=04/05/31,085000 AT+CALA=04/05/20,083000 17.2 AT+CCLK Real Time Clock Error OKAT+CCLK=? AT+CCLK? ATSBC=? Atsbc Battery charging / discharging and charge controlATSBC? SBC bcs, bcl, mpc Bcsnum SBC Undervoltage Currentnum BclnumMpcnum ATSBV=? Atsbv Battery/Supply VoltageAtsbv SBV value ATSCTM? ATSCTM=?Sctm n, m ATSCTM=n Sctmb m Sctma m Sctmb Sctma ATSSYNC=? Atssync Configure Sync PinATSSYNC? SSYNCmode Atssync parameter mode= ME status indicated by status LED patterns 18.1 A/ Repeat previous command line Miscellaneous Commands ATS3=n 18.2 ATS3 Write command line termination characterATS3? ATS4=n 18.3 ATS4 Set response formatting characterATS4? ATS5=n 18.4 ATS5 Write command line editing characterATS5? ATDmemn Restricted access to SIM data after SIM PIN authenticationAppendix See AT+CLIR List of *# CodesImei OK Like +CCWA *see AT+CCWA PAD FAX SMS SMS+FAX Mobile Available AT Commands and Dependency on SIM PIN ATDmemn ATDn ATDstr ATS7 ATS8 ATS10 ATP ATO ATD*99# ATD*98# Short Message Service SMS Commands AT+CRSM Atscks Atscid AT+CXXCID AT+CALA AT+CCLK Atsbc Atsbv Atsctm Atssync AT Command Settings storable with AT&W Show Mode, mt, bm, ds, bfr ATS0 Atslcc AT+CR Factory Default Settings Restorable with AT&F View=0 Format=0=0, m=0 Mode=0, mt=0, bm=0, ds=0, bfr=1 ATS3 Summary of Unsolicited Result Codes URC +CMT oa, scts, tooa, fo, pid, dcs Smgo modeSca, tosca, lengthCRLFdata Sstn Alphabetical List of AT Commands AT+CMGC AT+FBADLIN 23, Atssta ATD*99# ATT