Siemens MC55 26 AT+CSNS Single Numbering Scheme, At+Csns=?, At+Csns?, +CSNS mode, AT+CSNS=mode

MC55 AT Command Set

7.26 AT+CSNS

s

mobile

7.26AT+CSNS Single Numbering Scheme

Syntax

Test Command

AT+CSNS=?

Response(s)

+CSNS: (list of supported<mode>s)

OK

Read Command

AT+CSNS?

Response(s)

+CSNS: <mode>

OK

Write Command

AT+CSNS=[<mode>]

Response(s)

OK

PIN ASC0 ASC1 MUX1 MUX2 MUX3

￿ ￿ ￿ ￿ ￿ ￿

Reference(s)

GSM 07.07

Command Description

The AT+CSNS command enables the ME to accept incoming calls when no bearer capability information is pro- vided with the call, e.g. single numbering scheme calls or calls originitating from analog devices.

Parameter Description

<mode>(num)

[0](D)	Voice: Each call received without bearer element is assumed to be speech
2	Fax: Each call received without bearer element is assumed to be an incoming
	fax.
4	Data: Each call received without bearer element is assumed to be a data call.
	Please take into account that the bearer service parameters set with AT+CBST
	apply to all data calls including those received without bearer capability.

MC55_ATC_V01.05	Page 180 of 469	2/10/04
Confidential / Released