Danum | Siemens MC55 guide

MC55 AT Command Set

12.23 AT^SSDA

Parameter Description

<da>(num)

s

mobile

Display Availability
0(&F)	Application is not able to display incoming SMS
1	Application is able to display incoming SMS

Note

•If the ME operates on different instances (MUXchannels 1, 2, 3 or ASC0/ASC1) avoid different settings for routing and indicating SMS. For example, if messages shall be routed directly to one instance of the TE (set with AT+CNMI, AT^SSDA), it is not possible to activate the presentation of URCs with AT+CMER or AT+CNMI on another instance. Any attempt to activate settings that conflict with existing settings on another interface, will result in CME ERROR, or accordingly CMS ERROR.

MC55_ATC_V01.05	Page 354 of 469	2/10/04
Confidential / Released

Image 354

Siemens MC55 manual Danum

Contents

MC55 MC55 AT Command Set Contents ATSM20 AT+CSCSAtscfg AT+CMER Atslck AtspicAT+CLCK AT+CPWD AT+CSNS AT+CRAT+CRC Atscni AT+CGAUTO AT+CGACTAT+CGANS AT+CGDATA AT+FRH AT+FOPTAT+FREV AT+FRM Atsstr AtsstaAtsstgi AT+CPBR ATS3 AtsctmAtssync ATS4 List of Tables List of Figures Introduction Scope of the document Related documents Document conventions Quick reference tablePIN Superscript notation for parameters and values AT+CXXX=? AT command syntaxUsing parameters AT+CXXX? Combining AT commands on the same command line Supported character sets IRA Ascii BSPNull GSM alphabet tables and UCS2 character values Mobile GSM 2 UCS2 and GSM data coding and conversion for SMS text modeCscs UCS2 Cscs GSM UCS2 Mobile Flow Control Software flow control XON/OFF flow controlHardware flow control RTS/CTS flow control Unsolicited Result Code Presentation Communication between Customer Application and MC55 Common PCN Handset Specification Cphs CSP Errors and Messages Configuration Commands AT&FvalueValuenum AT&Vvalue AT&V Display current configuration1 AT&V responses Active Profile Active Profile +FCLASS+CGSMS ERROR/+CME Error err AT&Wvalue ATQ Set result code presentation mode ATQn ATVvalue ATV Set result code format modeVerbose and numeric result codes If value=0 If value=1 Connect 9600/RLP Connect 2400/RLPConnect 4800/RLP Connect 14400/RLP ATX Set Connect result code format and call monitoring ATXvalue ATZ Set all current parameters to user defined profile ATZvalue AT+CFUN=? OK Error +CME ErrorAT+CFUN Set phone functionality +CFUN fun Funnum Rstnum AT+CFUN? +CFUN AT+CFUN=1 AT+CFUN=0+CMTI SM,5 AT+CFUN=1,1 Wake up the ME from Sleep mode Fun=0URC Atsmso Atsmso Switch off mobile stationATSMSO=? Smso MS OFF OK AT+GCAP 10 AT+GCAP Request complete TA capabilities listAT+GCAP=? +GCAP name AT+CMEE=? 11 AT+CMEE Report mobile equipment errorOK Error AT+CMEE? Summary of CME Errors related to GSM AT+CMEE=2 Summary of GPRS-related CME Errors Summary of CMS Errors related to GSM No +CNMA ACK Expected Mobile 12 AT+CSCS Select TE character set AT+CSCS=?AT+CSCS? Also see chapter Supported character sets ATSCFG=? Atscfg Extended Configuration Setting+CME Error operation temporary not allowed ATSCFG? Scfg PowerSaver/Mode9/Timeout, cfun9-timeout URC indication via Ring line ATSCFG=URC/Ringline, uri Cfun9-timeoutstr+CSCS HandOverStatusstr+CSCS SCFGAudio/AMR,0065006E00610062006C00650064 SCFGAudio/AMR,enabledAT+CSCS=UCS2 AT+CSCS=GSM ATSCFG? AT+CSCS=GSM ATSM20? ATSM20 Set M20 compatibility modeATSM20=? SM20CallMode, CmgwMode CallModenum CmgwModenum AT+CMER=? Status Control CommandsAT+CMER Mobile Equipment Event Reporting AT+CMER? +CIEV indDescr, indValue Mobile AT+CIND Indicator control AT+CIND=?AT+CIND? Command Description ATSLCC, AT+CLCC or Atscni Also refer Call Status InformationStatenum AT+CPIN=9999 +CIEV call,1 +CIEV sounder,0 +CIEV call,0 ATD0123456+CIEV sounder,1 No Carrier ATSIND=? Atsind Extended Indicator ControlATSIND=indDescr, Mode ATSIND? User Issued AT+CEER AT+CEER Extended error reportAT+CEER=? +CEER locationID, reason, ssRelease AT+CHLD=2 OK AT+CHLD=3 Cause Location ID for the extended error report AT+clck=oi,1,0000,3 +CME Error incorrect password+CEER 35,0,43 GSM release cause for L3 Radio Resource RR Siemens release cause for L3 Radio Resource RR GSM release cause for Mobility Management MM Siemens release cause for L3 Mobility Management MM GSM release cause for L3 Call Control CC Mobile Siemens release cause for L3 Call Control CC Siemens release cause for L3 Advice of Charge AOC GSM Release cause for Supplementary Service Call Mobile Siemens release cause for Session Management SM GSM cause for L3 Protocol module or other local cause Siemens release cause for Gprs APISiemens release cause for Embedded Netcore ATS18=n ATS18 Extended call release reportATS18? +CAUSE locationID, reason Busy Connect 9600/RLP AT+CPAS AT+CPAS Mobile equipment activity statusAT+CPAS=? +CPAS pas AT+WS46? AT+WS46 Select wireless networkAT+WS46=? AT+WS46=n AT\Q Flowcontrol Serial Interface Control CommandsError AT\Qn AT&C Set circuit Data Carrier Detect DCD function mode AT&Cvalue AT&D Set circuit Data Terminal Ready DTR function mode AT&Dvalue AT&S Set circuit Data Set Ready DSR function mode AT&Svalue ATE Enable command echo ATEvalue AT+ILRR Set TE-TA local rate reporting AT+ILRR=?AT+ILRR? Ratenum AT+IPR? AT+IPR Set fixed local rateAT+IPR=? +IPR rate Chronized after restarting the GSM engine see chapter Autobauding AT+CMUX=? AT+CMUX Enter multiplex mode+CMUX mode AT+CMUX? Restrictions on Multiplex mode Subsetnum+++ ATS8 ATS6ATS7 ATS10 Second serial interface ASC1 AT+CFUN AT+CPIN=? Security CommandsAT+CPIN Enter PIN AT+CPIN? Pinstr New pintextCodetext PH-C PIN What to do if PIN or password authentication fails?PH-SP PUK PH-C PUK Mobile AT+CPIN2? AT+CPIN2 Enter PIN2AT+CPIN2=? +CPIN2 code AT+CPIN2? +CPIN2 SIM PUK2 New pinstrAT+CPWD=P2,0000,8888 AT+CPIN2=12345678,8888 AT+CPBW=2,+493012345678,145,Charly +CME ErrorAT+CPBS=FD AT+CPIN2=8888 AT+CPBW=2,+493012345678,145,Charly ATSPIC? Atspic Display PIN counterATSPIC=? Atspic Counternum Facilitystr +CPIN SIM PIN +CPIN SIM PUK At+cpin=9999 OK at+cpin? At+cpin=4714 +CME Error incorrect password Atspic Spic AT+CLCK=facility, mode, password, class AT+CLCK Facility lockAT+CLCK=? Phone security locks set by client or factory Factory defined SIM locks Classnum PasswordstrStatusnum SMS AT+CLCK=SC,2 AT+CPIN? +CPIN SIM PIN AT+CPIN=3333 AT+CPIN=1111AT+CPIN? +CPIN PH-SIM PIN AT+CLCK=PS,0,3333 ATSLCK=facility, mode, password, class Atslck Facility lockATSLCK=? AT+CPWD=facility, old password, new password AT+CPWD Change Password+CPWDlist of supported facility, password length +CME Error 16 +CME Error incorrect password Password length 4 to 8 digits Password length 4 digits Password lengthnum Old passwordstrNew passwordstr AT+CPWD=PS,12345678,1111 AT+CPWD=AO,0000,3333AT+CPWD=PS,1111,2222 AT+CPWD=PS,12345678 ATSPWD=facility, old password, new password Atspwd Change PasswordSPWDlist of supported facility, password length ATSPWD=? ATI Identification CommandsATI Display product identification information ATIvalue AT+CGMI Request manufacturer identification AT+CGMI=?AT+CGMI AT+GMI Request manufacturer identification AT+GMI=?AT+GMI AT+CGMM Request model identification AT+CGMM=?AT+CGMM AT+GMM Request TA model identification AT+GMM=?AT+GMM AT+CGMR AT+CGMR Request revision identification of software statusAT+CGMR=? Xx.yystr AT+GMR=? AT+GMRXx.yytext AT+CGSN=? AT+CGSN AT+GSN=? AT+GSN AT+CIMI 10 AT+CIMI Request international mobile subscriber identityAT+CIMI=? Imsi Call related Commands Call Status Information Call Status Information ATA Connect text TA switches to data modeATA Answer a call Textstr ATDnmgsm No DialtoneConnect text Mgsmstr ATD03022222222 ATDmemn Originate call to phone number in memory ATDmemnmgsmMemstr AT+CPBR=1,xx ATDSM15ATDLD9 Memory Mobile Sponding field ATDstrmgsm Mobile Atdi Mobile originated call to dialable Isdn number n ATDIn Atdl Redial last telephone number used Atdl ATH Disconnect existing connection ATHn 10 AT+CHUP Hang up call AT+CHUP=?AT+CHUP Call ATS0?ATS0=n Mobile 12 ATS6 Set pause before blind dialing ATS6?ATS6=n ATS7? ATS7=n ATS8? ATS8=n Carrier ATS10?ATS10=n ATP Select pulse dialing ATP ATO Switch from command mode to data mode / PPP online mode ATOn 18 +++ Switch from data mode to command mode ATT Select tone dialing ATT AT+CBST? 20 AT+CBST Select bearer service typeAT+CBST=? +CBST speed, name, ce 14400 bps AT+CRLP? Parent data callAT+CRLP=? +CRLP iws, mws, T1, N2, verx Verxnum AT+CLCC 22 AT+CLCC List current calls of MEAT+CLCC=? +CLCC idx, dir, stat, mode, mpty, number, type, alpha Mptynum NumberstrTypenum Mobile Slcc n ATSLCC=?ATSLCC? Atslcc ATSLCC=n Mobile originated call MOC Mobile terminated call MTC Traffic channel assignednum Alphastr Slcc Ring AT+CR=? 24 AT+CR Service reporting control+CR mode AT+CR? Servstr REL AsyncGprs AT+CRC? +CRC modeAT+CRC=? AT+CRC=mode Typestr FAXVoice AT+CSNS=? +CSNS mode26 AT+CSNS Single Numbering Scheme AT+CSNS? Mobile Atscni Atscni List Call Number InformationATSCNI=? Scni id1,cs,number,type Scni id2,cs,number,type String type phone number in format specified by type Atslcd Atslcd Display Last Call DurationATSLCD=? Slcd time Atstcd Atstcd Display Total Call DurationATSTCD=? Stcd time AT+COPN=? Network Service CommandsAT+COPN Read operator names AT+COPN AT+COPS? AT+COPS Operator selectionAT+COPS=? +COPSmode, format, oper Statnum Status Oper&V Operator Mobile AT+CREG? AT+CREG Network registrationAT+CREG=? +CREG n, stat, lac, ci =2 +CREGstat,lac,ci AT+COPS=0 LacstrAT+CREG=2 +CREG 1,0145,291A AT+CSQ AT+CSQ Signal qualityAT+CSQ=? +CSQ rssi,ber Mobile ATSMONC=? CME ErrorAtsmonc Cell Monitoring Atsmonc Cellnum BSICnumChannnum Atmoni Atmoni Monitor idle mode and dedicated modeATMONI=? ATMONI=period Plmn Atmoni responsesServing Cell Dedicated channel Chann rs DBm Chann TS timAdv PWR DBm Q ChMod Service states PWR Mobile Atmonp Atmonp Monitor neighbour cellsATMONP=? ATMONP=period MCC MNC BCC Atmonp responsesChann DBm 100 Atsmong Atsmong Gprs MonitorATSMONG=? ATSMONG=table , period Bcch Pbcch PAT MCC MNC NOM RAC Atsmong Cell Info TableGprs Monitor # Cell # ATSALS? Atsals Alternate Line ServiceATSALS=? Sals view, line ATSALS=1,1 Sals Atshom Atshom Display HomezoneATSHOM=? Shom homezonestate Atsplm Atsplm Read the Plmn listATSPLM=? SPLMnumeric, long alpha ATSPLR=index1, index2 Atsplr Read entry from the preferred operators listATSPLR=? Splr index1oper Splr index2oper Operstr ATSPLW=index, oper Atsplw Write an entry to the preferred operators listATSPLW=? Indexnum AT+CACM=? Supplementary Service CommandsAT+CACM Accumulated call meter ACM reset or query AT+CACM? Acmstr Passwdstr Atsacm Atsacm Advice of charge and query of ACM and ACMmaxATSACM=? Sacm n, acm, acmMax Ffffff Ccmstr AT+CAMM? AT+CAMM Accumulated call meter maximum ACMmax set or queryAT+CAMM=? +CAMM acmmax MC55ATCV01.05 217 10/04 Confidential / Released AT+CAOC? AT+CAOC Advice of Charge informationAT+CAOC=? AT+CAOC Query CCM value +CCUGn, index, info AT+CCUG Closed User GroupAT+CCUG=? AT+CCUG=n, index, info Infonum AT+CCFC=reason, mode , number, type, class, time AT+CCFC Call forwarding number and conditions controlAT+CCFC=? Not reachable Timenum At+ccfc=0,3,+493012345678,145 At+ccfc=0,4 At+ccfc=4,2 +CME error operation not supported at+ccfc=5,2At+ccfc=0,0 At+ccfc=0,2 +CCFC 0,1 +CCFC 0,2 +CCFC 0,4 AT+CCWA? AT+CCWA Call WaitingAT+CCWA=? AT+CCWA=n, mode, class +CCWA calling number, type of number, class, , CLI validity Scwa Calling numberstr Type of numbernumCLI validitynum At+ccwa=,2 At+ccwa=1At+ccwa=,1 At+ccwa=1,1 AT+CHLD=n AT+CHLD Call Hold and MultipartyAT+CHLD=? Udub At+ccwa=1,1,1 +CCWA +491791292364,145,32,,0At+chld=2 Ring ATA At+clccAt+clcc +CLCC 1,0,0,0,0,03038639268,129 AT+CLIP? AT+CLIP Calling line identification presentationAT+CLIP=? +CLIP number, type, , , , CLI validity Suppress unsolicited result codes AT+CLIR? 10 AT+CLIR Calling line identification restrictionAT+CLIR=? +CLIRn, m Mnum AT+CPUC? 11 AT+CPUC Price per unit and currency tableAT+CPUC=? +CPUC currency, ppu AT+CPUC=EUR,0.10,8888 AT+CPUC=EUR,0.10 +CME Error SIM PIN2 requiredPpustr AT+CPUC=EUR,0.10 AT+CSSN? 12 AT+CSSN Supplementary service notificationsAT+CSSN=? +CSSI code Code 1num Code 2num AT+CUSD? 13 AT+CUSD Supplementary service notificationsAT+CUSD=? AT+CUSD=n, str, dcs Strstr Dcsnum AT+CGACT=? Gprs Commands10.1 AT+CGACT PDP context activate or deactivate AT+CGACT? Cidnum Responsenum AT+CGANS=?AT+CGANS=response, L2P, cid L2Pstr Mobile AT+CGATT? 10.3 AT+CGATT Gprs attach or detachAT+CGATT=? +CGATT state State=1 AT+CGAUTO? AT+CGANScommandAT+CGAUTO=? +CGAUTO n Below Connect No Carrier Error +CME Error 10.5 AT+CGDATA Enter data stateAT+CGDATA=? Parameter Description AT+CGDCONT? 10.6 AT+CGDCONT Define PDP ContextAT+CGDCONT=? +CGDCONT cid, PDPtype, APN, PDPaddr, dcomp, hcomp PDPaddrstr PDPtypestrAPNstr Dcompnum AT+CGPADDR=? +CGPADDR OK Error +CME Error10.7 AT+CGPADDR Show PDP address +CGPADDR cid, PDPaddress AT+CGQMIN=? +CGQMIN cid, precedence, delay, reliability, peak, meanAT+CGQMIN=cid, precedence, delay, reliability, peak, mean AT+CGQMIN? Delaynum Delay class CidPrecedencenum Precedence class Reliabilitynum Reliability class PeaknumMeannum AT+CGDCONT=1,ip AT+CGQMIN= AT+CGQMIN? AT+CGQMIN=1,0 AT+CGQREQ=cid, precedence, delay, reliability, peak, mean 10.9 AT+CGQREQ Quality of Service Profile Requested+CGQREQ cid, precedence, delay, reliability, peak, mean AT+CGQREQ=? Reliabilitynum Peaknum AT+CGQREQ= AT+CGQREQ? AT+CGQREQ=1,0 AT+CGREG? 10.10 AT+CGREG Gprs network registration statusAT+CGREG=? +CGREG n, stat Stat=1 or stat=5 AT+CGSMS=? 10.11 AT+CGSMS Select service for MO SMS messages+CGSMS service AT+CGSMS? Circuit switched Atsgauth Set type of authentication for PPP connection ATSGAUTH=?ATSGAUTH? ATSGCONF? Atsgconf Configuration of Gprs related ParametersATSGCONF=? Sgconf llcpdulength, class Mobile Connect No Carrier Calledaddressstr 10.15 ATD*99# Request Gprs serviceATD*99* calledaddress* L2P* cid # PPP Cidnum 10.16 ATD*98# Request Gprs IP service ATD*98* cid # ATH 10.18 ATS0 Mobile AT+CGDCONT=2,IP, internet.t-d1.gprs Using Gprs AT commands ExamplesAT+CGDCONT=1,IP AT+CGDCONT=1 AT+CGACT=1,2 AT+CGQREQ=1,2AT+CGQREQ=1 AT+CGACT= Using the Gprs dial command ATD ConnectBy AT+CGDCONT AT+FCLASS Parameter FAX CommandsFAX parameters EIA/TIA-578-A Modnum 40 ms Badlin 11.2 AT+FBADLIN Bad Line ThresholdAT+FBADLIN? AT+FBADLIN=badlin Badmul 11.3 AT+FBADMUL Error Threshold MultiplierAT+FBADMUL? AT+FBADMUL=badmul AT+FBOR? 11.4 AT+FBOR Query data bit orderAT+FBOR=? Bor AT+FCIG=? AT+FCIG?AT+FCIG=id AT+FCLASS=n AT+FCLASS=?AT+FCLASS? EIA/TIA-592-A Mobile AT+FCQ? 11.7 AT+FCQ Copy Quality CheckingAT+FCQ=? AT+FCQ=cq 11.8 AT+FCR Capability to receive AT+FCR=cr AT+FDCC? 11.9 AT+FDCC Query or set capabilitiesAT+FDCC=? Vr, br, wd, ln, df, ec, bf, st AT+FDFFC? 11.10 AT+FDFFC Data Compression Format ConversionAT+FDFFC=? AT+FDFFC=df AT+FDIS? 11.11 AT+FDIS Query or set session parametersAT+FDIS=? AT+FDIS=vr, br, wd, ln, df, ec, bf, st 11.12 AT+FDR Begin or continue phase C data reception Connect or If error related to ME functionalityAT+FDR 11.13 AT+FDT Data Transmission AT+FDTAT+FDT=df, vr, wd, ln 11.14 AT+FET End a page or document AT+FET=ppmPpmnum 11.15 AT+FK Kill operation, orderly FAX abort AT+FK Lid AT+FLID=?AT+FLID? AT+FLID=lid 11.17 AT+FMDL Identify Product Model AT+FMDL?Gipsy Soft Protocolstack 11.18 AT+FMFR Request Manufacturer Identification AT+FMFR?Siemens 11.19 AT+FOPT Set bit order independently AT+FOPT=optOptnum Tout 11.20 AT+FPHCTO DTE Phase C Response TimeoutAT+FPHCTO? AT+FPHCTO=tout 11.21 AT+FREV Identify Product Revision AT+FREV?V2.550 11.22 AT+FRH Receive Data Using Hdlc Framing AT+FRH=modTIA/EIA-578 11.23 AT+FRM Receive Data AT+FRM=?AT+FRM=mod 11.24 AT+FRS Receive Silence AT+FRS=time 11.25 AT+FTH Transmit Data Using Hdlc Framing AT+FTH=mod 11.26 AT+FTM Transmit Data AT+FTM=?AT+FTM=mod 11.27 AT+FTS Stop Transmission and Wait AT+FTS=time AT+FVRFC? 11.28 AT+FVRFC Vertical resolution format conversionAT+FVRFC=? Vrfc Ackpdunum Short Message Service SMS CommandsSMS parameters Cdatanum Mem2str LengthnumMem1str Mem3str Pdunum PagenumPagesnum Sctsnum Tooanum StatstrTodanum Toranum AT+CMGC=? 12.2 AT+CMGC Send an SMS commandError +CMS Error +CMGC mr, scts AT+CMGD=? OK Error +CMS Error12.3 AT+CMGD Delete SMS message AT+CMGD=index AT+CMGF=? +CMGF mode12.4 AT+CMGF Select SMS message format AT+CMGF? 12.5 AT+CMGL List SMS messages from preferred store AT+CMGL=?AT+CMGL Mobile +CMGR stat, fo, mr, ra, tora , scts, dt, st data 12.6 AT+CMGR Read SMS messagesAT+CMGR=? +CMGR stat, fo, ct , pid, mn, da, toda, length data Mobile +CMGS mr, scts 12.7 AT+CMGS Send SMS messageAT+CMGS=? +CMGS mr, ackpdu Mobile AT+CMGW 12.8 AT+CMGW Write SMS messages to memoryAT+CMGW=? +CMGW index Command Description AT+CMSS=index , da, toda 12.9 AT+CMSS Send SMS messages from storageAT+CMSS=? +CMSS mr, scts AT+CNMA=? AT+CNMAAT+CNMA=n Mobile 12.11 AT+CNMI New SMS message indications AT+CNMI=?AT+CNMI? +CDS lengthCRLFpdu +CBM lengthCRLFpdu+CBM sn, mid, dcs, page, pagesCRLFdata +CDS fo, mr, ra, tora, scts, dt, st Ward them directly to the TE Mobile AT+CPMS=? OK Error Error +CMS Error12.12 AT+CPMS Preferred SMS message storage AT+CPMS? Total1num Used2numUsed3num Total2num Mobile AT+CSCA? 12.13 AT+CSCA SMS service centre addressAT+CSCA=? +CSCA sca, tosca AT+CSCB? 12.14 AT+CSCB Select Cell Broadcast Message IndicationAT+CSCB=? +CSCB mode, mids, dcss Dcssstr AT+CSDH? 12.15 AT+CSDH Show SMS text mode parametersAT+CSDH=? Not show pid , mn , da , toda , length or cdata AT+CSMP? 12.16 AT+CSMP Set SMS text mode parametersAT+CSMP=? +CSMPfo, vp/ scts, pid, dcs Pidnum 12.17 AT+CSMS Select Message Service AT+CSMS=?AT+CSMS? Mobile Terminated Messages Type not supported Type supported Atslms List SMS Memory Storage ATSLMS=?Atslms Used2num ATSMGL=? AtsmglATSMGL=stat ATSMGO=? Smgo n, modeError CME Error ATSMGO? SMS overflow presentation mode Smgr Atsmgr Read SMS message without setting status to REC ReadATSMGR=? ATSMGR=index ATSSCONF? Atssconf SMS ConfigurationATSSCONF=? SSCONFra Mobile ATSSDA? Atssda Set SMS Display AvailabilityATSSDA=? SSDAda Danum ATSSMSS? Atssmss Set Short Message Storage SequenceATSSMSS=? Ssmss seq AT+CRSM=command, fileID, P1, P2, P3, data SIM related Commands13.1 AT+CRSM Restricted SIM Access AT+CRSM=? Sw1num FileIDnumDatastr Sw2num ATSCKS? Atscks Query SIM and Chip Card Holder StatusATSCKS=? Scks mode, SimStatus SimStatusnum&V ATSCKS=1Scks Atscid Atscid Display SIM card identification numberATSCID=? Scid cid AT+CXXCID 13.4 AT+CXXCID Display card IDAT+CXXCID=? +CXXCID cid ATSSTA=? SIM Application Toolkit SAT CommandsAtssta SAT Interface Activation ATSSTA? Alphabetnum AllowedInstancenumSatProfilestr Sstn cmdTerminateValue Sstn SAT NotificationSstn cmdType Sstn CmdTypenum CmdTerminateValuenum ATSSTGI? Atsstgi SAT Get InformationATSSTGI=? Sstgi state, cmdType Related Proactive Command ATSSTR? Atsstr SAT ResponseATSSTR=? Sstr state, cmdType InputNumbernum InputStringstr Phonebook Commands Sort Order for Phonebooks +CPBR 1-maxloc,nlength, tlength 15.2 AT+CPBR Read from PhonebookAT+CPBR=? AT+CPBR=location1, location2 Typenum Address type Location1numLocation2num Maxlocnum Tlengthnum +CPBR2,+777777,145,Bill +CPBR3,+888888,145,Arthur AT+CPBS? 15.3 AT+CPBS Select phonebook memory storageAT+CPBS=? +CPBS storage, used, total Storagestr UsednumTotalnum +CPBW 1-maxloc,nlength, list of supported types, tlength 15.4 AT+CPBW Write into PhonebookAT+CPBW=? AT+CPBW=location, number, type, text Locationnum AT+CPBW=,+431234567,145,international AT+CPBW=1 ATSPBC=schar Atspbc Search the first entry in the sorted telephone bookATSPBC=? Spbc index Scharstr+CSCS Atspbd Purge phonebook memory storage ATSPBD=?ATSPBD=storage Storagestr Spbg 1-used,nlength, tlength Atspbg Read current Phonebook entriesATSPBG=? ATSPBG=index1, index2, RealLocReq RealLocReqnum Spbg 1-33,20,17 ATSPBG=1,33 ATSPBG=1,33,1 AT+CPBR=27+CPBR 27,+999999,145,Arthur Atspbs Step through the selected phonebook alphabetically ATSPBS=?ATSPBS=value, RealLocReq Counter value Index-b=index-a+1Index-c=index-b+1 Internal-counternum At&f +CPBR27,+999999,145,Arthur Atsdld Delete the last number redial memory ATSDLD=?Atsdld Audio Commands Audio programming model ATL Set monitor speaker loudness ATLvalValnum ATM Set monitor speaker mode ATMval 16.4 AT+CLVL Loudspeaker volume level AT+CLVL=?AT+CLVL? AT+CFUN=1,1 16.5 AT+CMUT Mute control AT+CMUT=?AT+CMUT? AT+VTD? 16.6 AT+VTD Tone durationAT+VTD=? Duration AT+VTS=dtmfString 16.7 AT+VTS Dtmf and tone generationAT+VTS=? AT+VTS=dtmf, duration Mobile ATSAIC? Atsaic Audio Interface ConfigurationATSAIC=? Saic io, mic, ep Microphone selection Atsnfa Set or query of microphone attenuation ATSNFA=?ATSNFA? OK atsnfa? Snfa OK atsnfs=4 OK atsnfa=1 OK atsnfi? Snfi 5,1 OK atsnfa? Snfa Atsnfd Set audio parameters to manufacturer default values ATSNFD=?Atsnfd ATSNFI? Atsnfi Set microphone path parametersATSNFI=? Snfi inBbcGain, inCalibrate Mobile ATSNFM=MicSwitch , MicVccCtl Atsnfm Set microphone audio path and power supplySnfm MicSwitch, MicVccState ATSNFM=? MicSwitchnum MicVccCtlnumMicVccStatenum ATSNFO? Atsnfo Set audio output = loudspeaker path parameterATSNFO=? OutBbcGainnumSNFW OutCalibratenumSNFW OutStepnum ATSNFPT? Atsnfpt Set progress tonesATSNFPT=? Snfpt pt ATSNFS? Atsnfs Select audio hardware setATSNFS=? Snfs audMode Atsnfd restores audMode Atsnfw ATSNFS=4 ATSAIC?ATSNFS=2 ATSAIC? ATSNFS=4 ATSAIC=2,1,1 ATSNFTTY? Atsnftty Switch audio path to TTY/CTM modeATSNFTTY=? Snftty state Audio path is in normal speech mode ATSNFV? Atsnfv Set loudspeaker volumeATSNFV=? Snfv outStep MC55ATCV01.05 420 10/04 Confidential / Released Atsnfw Write audio setting in non-volatile store ATSNFW=? ATSRTC? Atsrtc Ring tone configurationATSRTC=? Atsrtc Volumenum Mobile AT+CALA=? Hardware related Commands17.1 AT+CALA Set alarm time AT+CALA? Sysstart Alarm Mode +CALA text +CALA text AT+CALA=04/05/31,093000,0,0,Good Morning +CALA Good Morning AT+CALA=04/05/31,085000 Summary of AT commands available in Alarm modeSysstart Alarm Mode AT+CALA=04/05/20,083000 AT+CCLK=? Error OK17.2 AT+CCLK Real Time Clock AT+CCLK? ATSBC? Atsbc Battery charging / discharging and charge controlATSBC=? SBC bcs, bcl, mpc SBC Undervoltage Bcsnum Bclnum MpcnumCurrentnum Atsbv Atsbv Battery/Supply VoltageATSBV=? SBV value Sctm n, m ATSCTM=?ATSCTM? ATSCTM=n Sctma m Sctmb m Sctma Sctmb ATSSYNC? Atssync Configure Sync PinATSSYNC=? SSYNCmode ME status indicated by status LED patterns Atssync parameter mode= Miscellaneous Commands 18.1 A/ Repeat previous command line 18.2 ATS3 Write command line termination character ATS3?ATS3=n 18.3 ATS4 Set response formatting character ATS4?ATS4=n 18.4 ATS5 Write command line editing character ATS5?ATS5=n Restricted access to SIM data after SIM PIN authentication AppendixATDmemn List of *# Codes Imei OKSee AT+CLIR Like +CCWA *see AT+CCWA FAX SMS SMS+FAX PAD Mobile Available AT Commands and Dependency on SIM PIN ATDmemn ATDn ATDstr ATS7 ATS8 ATS10 ATP ATO ATD*99# ATD*98# Short Message Service SMS Commands AT+CRSM Atscks Atscid AT+CXXCID AT+CALA AT+CCLK Atsbc Atsbv Atsctm Atssync AT Command Settings storable with AT&W Mode, mt, bm, ds, bfr Show ATS0 Atslcc AT+CR Factory Default Settings Restorable with AT&F =0, m=0 Format=0View=0 Mode=0, mt=0, bm=0, ds=0, bfr=1 ATS3 Summary of Unsolicited Result Codes URC Sca, tosca, lengthCRLFdata Smgo mode+CMT oa, scts, tooa, fo, pid, dcs Sstn Alphabetical List of AT Commands AT+CMGC AT+FBADLIN 23, Atssta ATD*99# ATT