Siemens MC55 manual 11.2 AT+FBADLIN Bad Line Threshold, At+Fbadlin?, Badlin, AT+FBADLIN=badlin

MC55 AT Command Set

11.2 AT+FBADLIN

s

mobile

11.2AT+FBADLIN Bad Line Threshold

Syntax

Read Command

AT+FBADLIN?

Response(s)

<badlin>

OK

Write Command

AT+FBADLIN=<badlin>

Response(s)

OK

If error is related to ME functionality

ERROR

PIN ASC0 ASC1 MUX1 MUX2 MUX3

￿ ￿ ￿ ￿ ￿ ￿

Reference(s)

EIA PN-2388

Command Description

This command defines the Copy-Quality-OK-threshold. If <badlin> consecutive lines have pixel count errors in normal resolution (98 dpi) mode, then the copy quality is unacceptable. If <badlin> * 2 consecutive lines have pixel count errors in fine resolution (196 dpi) mode, then the copy quality is unacceptable. "Copy Quality Not OK" occurs if either the error percentage is too high or too many consecutive lines contain errors. A value of 0 implies that error checking is not present or disabled.

Parameter Description

<badlin>(num)

bad lines

0...10(P)...255

Note

•Used for Fax Class 2 only

MC55_ATC_V01.05	Page 284 of 469	2/10/04
Confidential / Released