MC55 AT Command Set

17.1 AT+CALA

EXAMPLE 2

s

mobile

To set a fresh alarm using the same message as in Example 1, simply enter date and time. <n>, <type>, <text>, <tlength> can be omitted:

AT+CALA="04/05/31,08:50:00"

OK

When the alarm is executed the URC comes with the same message:

+CALA: Good Morning

EXAMPLE 3

To configure the alarm mode, e.g. for May 20, 2004, at 8.30h, enter

AT+CALA="04/05/20,08:30:00"

OK

Next, power down the ME:

AT^SMSO ^SMSO: MS OFF

When the alarm is executed the ME wakes up to Alarm mode and displays a URC. If available, this line is followed by the individual <text> most recently saved. If no individual message was saved only the first line appears.

^SYSSTART ALARM MODE

+CALA: Good Morning

17.1.1Summary of AT commands available in Alarm mode

Table 17.1: List of AT Commands Available in Alarm and Charge-only Mode>

AT command

Use

AT+CALA

Set alarm time

AT+CCLK

Set date and time of RTC

AT^SBC

In Alarm mode, you can query the present current consumption only and check

 

whether or not a charger is connected. The battery capacity is returned as 0,

 

regardless of the actual voltage (since the values measured directly on the cell are

 

not delivered to the module).

AT^SCTM

Query temperature of GSM engine

AT^SMSO

Power down GSM engine

 

 

MC55_ATC_V01.05

Page 428 of 469

2/10/04

Confidential / Released

 

 

Page 428
Image 428
Siemens MC55 manual Summary of AT commands available in Alarm mode, AT+CALA=04/05/31,085000, AT+CALA=04/05/20,083000