MC55 AT Command Set
7.22 AT+CLCC s
m
obil
e
MC55_ATC_V01.05 Page 168 of 469 2/10/04
Confidential / Released
1 held
2dialing (MOC)
3 alerting (MOC)
4 incoming (MTC)
5 waiting (MTC)
bearer/teleservice
0voice
1 data
2fax
3 voice followed by data, voice mode (only in connection with single numbering
scheme AT+CSNS)
4 alternating voice/data, voice mode (only in connection with singl e numbering
scheme AT+CSNS)
5 alternating voice/fax, voice mode (only in connection with single numberin g
scheme AT+CSNS)
6 voice followed by data, data mode (only in connection with single numbering
scheme AT+CSNS)
7 alternating voice/data, data mode (only in connection with single numbering
scheme AT+CSNS)
8 alternating voice/fax, fax mode (only in connection with single numb ering
scheme AT+CSNS)
9 unknown
0 call is not one of multiparty (conference) call parties
1 call is one of multiparty (conference) call parties
phone number in format specified by <type>
type of address octect
145 dialling string <number> includes international access code charact er '+'
129 otherwise
Alphanumeric representation of <number> corresponding to the entry found in phonebo ok; used character set
should be the one selected with command AT+CSCS (Select TE Character Set).
The maximum displayed length of <alpha> is 16 characters. If the <alpha> has more than 16 charac ters, only
the first 15 characters will be displayed. To indicated an overflow, a spec ial character will be used as the 16th
character. This will be a space if the character set selected with AT+CSCS is 'GSM', or 'E400' if the character set
<mode>(num)
<mpty>(num)
<number>(str)
<type>(num)
<alpha>(str)(+CSCS)