MC55 AT Command Set

7.8 ATDL

s

mobile

7.8ATDL Redial last telephone number used

Syntax

Exec Command

ATDL[;]

Response(s)

If there is no last number or number is not valid:

+CME ERROR

If no dialtone (parameter ATX2 or ATX4):

NO DIALTONE

If busy (parameter setting ATX3 or ATX4):

BUSY

If connection cannot be set up:

NO CARRIER

If successfully connected and non-voice call (TA switches to online data mode):

CONNECT <text>

When TA returns to command mode after call release:

OK

If successfully connected and voice call:

OK

PIN ASC0 ASC1 MUX1 MUX2 MUX3

￿ ￿ ￿ ￿ ￿ ￿

Reference(s)

V.25ter

Command Description

This command redials the last voice and data call number used in the ATD command. If terminated with semi- colon ";" ATDL dials the last voice call number stored in the "LD" phonebook. Otherwise, the last dialed data or fax number will be used (not contained in the "LD" phonebook).

Note

This command may be aborted generally by receiving a character during execution. Abortion is not possible during some states of connection setup such as handshaking.

MC55_ATC_V01.05

Page 150 of 469

2/10/04

Confidential / Released

 

 

Page 150
Image 150
Siemens MC55 manual Atdl Redial last telephone number used