Siemens MC55 manual Counternum, Facilitystr

MC55 AT Command Set

5.3 AT^SPIC

s

mobile

If the responses to "AT+CPIN?" and "AT+CPIN2?" both read "READY", there is no currently required password, and the referrer of the execute command "AT^SPIC" is explicitly undefined.

In these cases, the read command "AT^SPIC?" may be used to determine, which password the response of the execute command actually refers to. Also, the write command may be used in order to retrieve the counter for a specific password.

The write command returns the number of attempts still available for entering the password identified by <facility>, e.g. the PIN, PIN 2, PH-SIM PIN etc.

Parameter Description

<counter>(num)

Number of attempts for the currently required password. This number will be counted down after each failure.

<facility>(str)

password for which the corresponding PIN counter is to be displayed .

“SC“	SIM PIN or SIM PUK. If the SIM PIN has been deactivated after three failed
	attempts, the counter for SIM PUK will be returned instead.
“PS“	"phone code" or "device code" (cf. AT+CLCK and AT+CPWD). If incorrectly
	entered three times, the Master Phone Code is required to lift the lock and the
	number of remaining attempts for the master phonecode will be returned.
“P2“	SIM PIN 2 or SIM PUK 2. If the SIM PIN 2 has been deactivated after three
	failed attempts, the counter for SIM PUK 2 will be returned instead.
“PN“	Network Personalisation

<code>(text)

Identification of the currently required password.

SIM PIN	ME is waiting for SIM PIN1.
SIM PUK	ME is waiting for SIM PUK1 if PIN1 was disabled after three failed attempts to
	enter PIN1.
SIM PIN2	ME is waiting for PIN2, when the attempt to access PIN2 requiring features was
	acknowledged with +CME ERROR:17 (e.g. if client attempts to edit the FD
	phonebook).
SIM PUK2	ME is waiting for PUK2 to unblock a disabled PIN2. Necessary if preceding
	command was acknowledged with error +CME ERROR:18.
PH-SIM PIN	ME is waiting for phone-to-SIM card password if ''PS'' lock is active and user
	inserts other SIM card than the one used for the lock. (''PS'' lock is also referred
	to as phone or antitheft lock).
PH-SIM PUK	ME is waiting for Master Phone Code, if the above ''PS'' lock password was
	incorrectly entered three times.
PH-NET PIN	ME is waiting for network personalisation password
PH-NET PUK	ME is waiting for network personalisation unblocking password

Notes

•Whenever the required password changes, <counter> changes to reflect that change. Please refer to the examples below.

MC55_ATC_V01.05	Page 111 of 469	2/10/04
Confidential / Released