Siemens MC55 manual Mobile originated call MOC Mobile terminated call MTC

MC55 AT Command Set

7.23 AT^SLCC

s

mobile

Use the write command to activate or deactivate event reporting for URC "^SLCC". Event reporting can be enabled separately for each interface. Interface settings are saved with AT&W and can be displayed with AT&V.

Parameter Description

<idx>(num)

call identification number as described in GSM02.30 subclause 4.5.5.1; this number can be used in AT+CHLD command operations

<n>(num)(&W)(&V)

	[0](&F)	presentation of URC "^SLCC" disabled
1		presentation of URC "^SLCC" enabled
	<dir>(num)
0		mobile originated call (MOC)
1		mobile terminated call (MTC)
	<stat>(num)
	state of the call
0		active
1		held
2		dialing (MOC)
3		alerting (MOC)
4		incoming (MTC)
5		waiting (MTC)
6		terminating: The call is not active anymore, but inband information is still avail-
		able.
7		dropped: The call has been suspended by the network, but may be resumed
		later.
	<mode>(num)
	bearer/teleservice
0		voice
1		data
2		fax
3		voice followed by data, voice mode (only in connection with single numbering
		scheme AT+CSNS)
4		alternating voice/data, voice mode (only in connection with single numbering
		scheme AT+CSNS)
5		alternating voice/fax, voice mode (only in connection with single numbering
		scheme AT+CSNS)
6		voice followed by data, data mode (only in connection with single numbering
		scheme AT+CSNS)
MC55_ATC_V01.05		Page 172 of 469	2/10/04
Confidential / Released