Siemens MC55 manual 12 AT+CSCS Select TE character set, At+Cscs=?, At+Cscs?

MC55 AT Command Set

2.12 AT+CSCS

s

mobile

2.12AT+CSCS Select TE character set

Syntax

Test Command

AT+CSCS=?

Response(s)

+CSCS: (list of supported<chset>s)

OK

Read Command

AT+CSCS?

Response(s)

+CSCS: <chset>

OK

Write Command

AT+CSCS=[<chset>]

Response(s)

OK

PIN	ASC0	ASC1	MUX1	MUX2	MUX3
￿	￿	￿	￿	￿	￿

Reference(s)

GSM 07.07, GSM 11.11

Command Description

Write command informs TA which character set <chset> is used by the TE. TA is then able to convert character strings correctly between TE and ME character sets.

Parameter Description

<chset>(str)

	“GSM“(&F)	GSM default alphabet (GSM 03.38 subclause 6.2.1);
		Note: This setting may cause software flow control problems since the codes
		used to stop and resume data flow (XOFF = decimal 19, XON = decimal 17)
		are interpreted as normal characters.
	“UCS2“	16-bit universal multiple-octet coded character set (ISO/IEC10646 [32]); UCS2
		character strings are converted to hexadecimal numbers from 0000 to FFFF;
		e.g. "004100620063" equals three 16-bit characters with decimal values 65, 98
		and 99, $(AT R97)$
MC55_ATC_V01.05		Page 52 of 469	2/10/04
Confidential / Released