Siemens MC55 manual AT&Wvalue, ERROR/+CME Error err

MC55 AT Command Set

2.3 AT&W

s

mobile

2.3 AT&W Stores current configuration to user defined profile

Syntax

Exec Command

AT&W[<value>]

Response(s)

OK

ERROR/+CME ERROR <err>

PIN	ASC0	ASC1	MUX1	MUX2	MUX3
￿	￿	￿	￿	￿	￿

Reference(s)

V.25ter

Command Description

TA stores the currently set parameters to a user defined profile in the non-volatile memory.

Parameter Description

<value>(num)

[0] Number of profile

Notes

•The user defined profile will be restored automatically after PowerUp. Use ATZ to restore user profile and AT&F to restore factory settings. Until the first use of AT&W, ATZ works as AT&F.

•User defined profiles in multiplex mode:

AT&W stores the current setting of each channel to the user profile, no matter on which of the three channels the command is executed. Each channel may have an individual profile.

•A list of parameters stored to the user profile can be found in Chapter AT Command Settings storable with AT&W.

MC55_ATC_V01.05	Page 33 of 469	2/10/04
Confidential / Released