Samsung SF-340 Series manual LCD error messages

LCD error messages

Display	Status/Solution	Related to:
Adjust scanner first in Maintenance	The shading waveform to be used as a reference is corrupted due	Scanner
menu	to unknown reason. Adjust the scanner to fix this problem as
	described in "Shading adjustment" on page 8.4.
Check white paper document and try	The scanning level is too low to compare with reference level.	Scanner
again	To adjust shading, you should use the plain and white paper.
Clean white roller, glass and try again	The scanning level is slightly low, which can affect the image	Scanner
	quality. To clean concerned parts, see "Cleaning the document
	scanner" on page 8.2.
Duplicated with [Speed No.xx]	The same number has already been registered into another speed	Telephone
The ‘xx’ indicates the location	dial location.
number.
Exceeded Job Memory	The machine can hold 3 My Favorites but you tried to add more.	Fax
Exceeded Job Memory	The broadcasting and delayed fax can hold 5 jobs in total.	Fax
Cancel scheduled job and try again	Cancel scheduled job and try again.
Exceeded Total	The machine can hold up to 100 messages (OGM + ICM +	TAM (SF-345TP
Message Memory	recorded conversations).	only)
	Erase old messages to make a room in the memory.
ICM Memory Full	The voice memory is full. No more caller’s messages can be	TAM (SF-345TP
	recorded (Total recording time is about 15 minutes).	only)
Ink Low. Install new ink cartridge	The print cartridge has run out of ink. To install a new Print Car-
	tridge, see "Replacing the print cartridge" on page 8.3. Although
	this message is displayed, you can make a copy or print a report.	Cartridge
	But, stored data in memory can be printed by changing the car-
	tridge.
Install ink cartridge	Print cartridge is not installed or improperly installed.	Cartridge
Invalid Time	The time you set for fax forwarding is wrong.	Fax
Job Not Assigned	You attempted to cancel the scheduled job but there is no jobs	Fax
	scheduled. You attempted to delete or print send the My Favor-
	ites document when there is no document stored.
Junk Fax Empty	You attempted to delete the junk fax number when there is no	Fax
	junk fax number.
Junk Fax Full	The machine can hold 20 junk fax numbers but you tried to add	Fax
	more.
Load Document	You have tried to send a fax and there is no document loaded	Document
	into the machine.
Load paper and press Enter	You have tried to do any job and there is no paper loaded into the	Paper
	machine.
Memory Full	Memory has become full while receiving a fax or short message.	Fax/Telephone
Memory Full	Memory has become full while scanning a document. Press	Fax/Copy
Press Enter to continue	Enter to send or copy the scanned pages only. To cancel the job
	press Stop/Clear and try again when memory becomes avail-
	able, or split the new document into smaller parts.

8.7

CARE AND	MAINTENANCE
CARE AND	MAINTENANCE