Samsung SF-340 Series manual Making Connection, Installing Samsung Software, System Requirements

Models: SF-340 Series

1 81
Download 81 pages 17.09 Kb
Page 49
Image 49
Making Connection

Making Connection

Connect the USB cable which came with your machine.

• The “New Hardware found” message is shown, click the “cancel” button.

Installing Samsung Software

This printer supports only black print.

You must install software using the supplied CD-ROM after you have set up your machine and connected it to your computer.

System Requirements

Verify the following:

At least 64MB (Windows 9x/Me), 128 MB (Windows 2000), 256 MB (Windows XP) or more of RAM is installed on your PC.

There is at least 300 MB or free disk space on your PC.

All applications are closed on your PC before beginning installation.

You are using Windows 98, Windows Me, Windows 2000, or Windows XP.

You are using at least Internet Explorer 5.0.

Installing Printer Software

For Windows 98/Me/2000/XP users, cancel the “New Hardware Found” screen when the computer boots up. Make sure that your machine is plugged in and connected to your computer’s USB port before installing software from the CD.

1Insert the supplied CD into your CD-ROM drive.

The CD should automatically run and the opening window appear.

If the installation window does not appear, click Start, and then Run. Type X:setup.exe, replacing “X” with the letter of your CD-ROM drive, and click OK.

2If the following window opens, connect your machine to the computer and turn the printer on. Then click Next.

If the machine is already connected and turned on, this screen does not appear. Skip to the next step.

If you click Next and the machine is not connected to the machine, an alert message window appears.

After connecting the machine and turning it on, click Yes. Or, if you want to install the software without the machine, Click No.

7.2

Page 49
Image 49
Samsung SF-340 Series Making Connection, Installing Samsung Software, System Requirements, Installing Printer Software