Casablanca Fan Company Casablanca 19th Century manual Lag Screw Installation, Canopy Hardware

LAG SCREW INSTALLATION

Step 2. Route the outlet box wires through the 1/2″ diam- eter outer hole of the canopy adaptor plate. Attach the crossbar and canopy adaptor plate to outlet box with screws provided.

Step 3. With the large washer attached, pass the lag screw through the center hole of canopy adaptor plate and screw into guide hole. Tighten until outlet box is firmly mounted to beam. This box must be firmly secured to the ceiling. We recommend that the ceiling fixture outlet box be of suffi- cient capacity enabling it to support the weight of fan and light fixture under any conditions.

1/2″ DIAMETER

OUTER HOLE

LAG

SCREW

LARGE

WASHER

CANOPY HARDWARE

CANOPY SCREW (4)

CANOPY LOCK WASHER (4)

CANOPY	CANOPY
HATCH
	CANOPY INSTALLATION

Step 4. Attach the canopy to the crossbar mounting bracket behind the installed outlet adaptor plate with three of the 8-32 x 21/2″ long canopy screws and lock washers provided with your Casablanca fan. Hand tighten until snug against the ceiling.

Note: On sloped ceilings, align the canopy opening toward the top or peak of the room.

FEED OUTLET BOX

WIRES THROUGH

CANOPY OPENING

CANOPY

LOCK

WASHER

CANOPY

SCREW

6