LIGHT KIT WIRING
NOTE: If you do not desire to install the light kit, see “Optional Switch Housing Cup” installation instructions on Page 11.
Step 15. Remove the wire nuts on the BLACK and WHITE wires from the fan. If necessary re- move the insulation from the last 1/2” of each wire (fan and light fixture).
Step 16. Attach the switch housing wires to the light fixture wires by placing the bare ends of the wires together and then securing with a wire nut. Connect in this order:
• WHITE wire from fan to WHITE wire from light fixture. Secure with wire nut.
•BLACK wire from fan to BLACK wire from light fixture. Secure with wire nut.
Inspect each wire nut and ensure that no bare wire is visible; pull on each wire to test the connection is mechanically sound.
WIRE NUT
INSTALL LIGHT KIT
Step 17. Slide the light kit over the threaded pipe from the switch housing. Assure that no wires are pinched.
Secure the light kit to the fan with the finial.
Tighten securely by hand only.
WIRE NUT
THREADED
PIPE
FINIAL
10