19th Century ™
PREPARATION INSTRUCTIONS
Unpacking: Before assembling and installing your ceiling fan, remove all parts from the shipping cartons and check them against the parts listed here. Before discarding packaging material, be certain that all parts have been removed.
GETTING STARTED
Carton Contents
The fan carton contains the fan body, warranty card, owner's manual, and all the parts necessary to assemble and install your Casablanca ceiling fan. These parts are shown at the start of each installation section. Before you start, go through this Owner’s Manual and confirm that you have all the parts shown in each section.
Be sure to use only genuine Casablanca blades. The blade shrink wrap holds 4 blades of matched weight. If more than one fan is being installed, be sure not to mix blade sets.
CAUTION: When removing the shrink wrap, be careful not to scratch the blades.
PERMA•LOCK™ HARDWARE
DOWNROD COVER | RUBBER DOWNROD | METAL DOWNROD |
| GASKET | GASKET |
DOWNROD & BALL
ASSEMBLY
INSTALL RUBBER GASKET
Prepare the downrod as follows:
Step A. Insert the small lip of the rubber gasket into the downrod cover.
ATTACH COVER TO DOWNROD
Step B. Slide the downrod cover, rubber gasket first, onto the downrod by using a twisting motion. Continue until the rub- ber gasket is flush with the downrod ball.
CAUTION: Do not attach the cover onto the downrod by pounding the downrod into the floor. This will damage the hanging mecha- nism and may cause the fan to fall.
INSTALL METAL GASKET
Step C. Attach the metal gasket onto the downrod assembly as shown. Using the provided screw, secure the metal gasket. Tighten the screw by hand only.
3
