19th Century ™
BLADE HARDWARE
BLADE | BLADE |
| BLADE | |
WASHER | BLADE | |||
SCREW | ||||
| ||||
|
| HOLDER |
|
ATTACH BLADE HOLDERS
Step 13. Attach the blades to the blade holders by align- | BLADE | |
SCREW | ||
ing the screw holes of the holder with the holes of the | ||
| ||
blade. | BLADE | |
| ||
Attach the blade holder using the four blade screws and | WASHER | |
blade washers provided for each blade. |
|
Using the screwdriver, tighten securely by hand only.
INSTALL BLADE ASSEMBLY
Step 14. Remove the blade holder screw from the fan. Slide the blade assembly into the cross bar, assuring that the alignment holes line up.
Reinstall the blade holder screw, making sure that the | BLADE |
blade assembly is secure and does not rotate when turned. | HOLDER |
| SCREW |
Using a wrench or pliers, tighten securely by hand only. | ALIGNMENT |
| |
| HOLES |
ALIGNMENT |
|
PIN |
|
BLADE HOLDER |
|
SCREW |
|
BLADE
ASSEMBLY
9
