Black Box LB308A, 8-port 10/100base-tx hardened ethernet extender switch user manual Snmp

Chapter 6: Command Line Console Management

1. Command Mode: Configure mode

Logon to Configure Mode (Configure Terminal Mode). The switch_a(config)# prompt will show on the screen.

switch_a(config)#

2. Usage:

Use mls qos map dscp-queue command to map the DSCP values to a queue.

3. Command Syntax:

mls qos map dscp-queue DSCP_VALUE to QUEUE_ID

DSCP_VALUE DSCP values. Up to 8 values (separated by spaces). Range is 0-63.

QUEUE_ID Queue ID. Range is 0-3.

4. Example:

The following example shows mapping DSCP values 0 to 3 to queue 1 on the Hardened Ethernet Extender Switch:

switch_a(config)#mls qos map dscp-queue 0 1 2 3 to 1

switch_a(config)#

6.9 SNMP

SNMP General Setting, SNMP v1/v2c, SNMP v3

SNMP General Setting

SNMP Status:

1. Command Mode: Configure mode

Logon to Configure Mode (Configure Terminal Mode). The switch_a(config)# prompt will show on the screen.

switch_a(config)#

2. Usage:

Use snmp-server enable command to enable and no snmp-server enable com- mand to disable SNMP to the Hardened Ethernet Extender Switch.

3.Command Syntax: (no) snmp-server enable

Page 168 724-746-5500 blackbox.com LB308A