Black Box LB308A user manual Command Line Console Management

Chapter 6: Command Line Console Management

4. Example:

The following example specifies to set Max. Speed settings (50) in the symmetric mode for Ethernet Extender port 1 (vdsl1):

switch_a(config)#interface vdsl1

switch_a(config-if)#vdsl maxspeed 50

switch_a(config-if)#

Symmetric Mode Fixed Rate:

1. Command Mode: Interface mode

Logon to Configure Mode (Configure Terminal Mode).

Then logon to Interface mode.

vdsl1 means Ethernet Extender port 1.

The switch_a(config-if)# prompt will show on the screen.

switch_a(config)#interface vdsl1

switch_a(config-if)#

2. Usage:

Use this command to set fixed rate bandwidth settings in the symmetric mode for Ethernet Extender port. Use the no parameter with this command to disable fixed rate bandwidth settings for Ethernet Extender port.

3.Command Syntax:

vdsl sym-fixedrate RATE no vdsl fixedrate

Page 186 724-746-5500 blackbox.com LB308A