Black Box 8-port 10/100base-tx hardened ethernet extender switch, LB308A user manual Dscp

Chapter 6: Command Line Console Management

2. Usage:

Use wrr-queue bandwidth command to specify the bandwidth ratios of the transmit queues.

3. Command Syntax: wrr-queue bandwidth WRR_WTS

WRR_WTS Weighted Round Robin (WRR) weights for the 4 queues (4 values separated by spaces). Range is 1–55.

4. Example:

The following example specifies the bandwidth ratios of the transmit queues on the Hardened Ethernet Extender Switch:

switch_a(config)#wrr-queue bandwidth 1 2 4 8 switch_a(config)#

802.1p Priority

1. Command Mode: Configure mode

Logon to Configure Mode (Configure Terminal Mode). The switch_a(config)# prompt will show on the screen.

switch_a(config)#

2. Usage:

Use wrr-queue cos-map command to specify CoS values for a queue.

3. Command Syntax:

wrr-queue cos-map QUEUE_ID COS_VALUE QUEUE_ID Queue ID. Range is 0-3.

COS_VALUE CoS values. Up to 8 values (separated by spaces). Range is 0-7.

4. Example:

The following example shows mapping CoS values 0 and 1 to queue 1 on the Hardened Ethernet Extender Switch:

switch_a(config)#wrr-queue cos-map 1 0 1 switch_a(config)#

DSCP

LB308A 724-746-5500 blackbox.com Page 167