Command Line Console Management | Black Box LB308A specs

Chapter 6: Command Line Console Management

Static-MAC-Entry Discard:

1. Command Mode: Configure mode

Log on to Configure Mode (Configure Terminal Mode). The switch_a(config)# prompt will show on the screen.

switch_a(config)#

2. Usage:

Use this command to statically configure a bridge entry to discard matching frames in a particular VLAN.

3. Command Syntax:

bridge GROUP address MAC discard vlan VLANID no bridge GROUP address MAC discard vlan VLANID GROUP <1-1> Bridge-group ID used for bridging.

MAC the Media Access Control (MAC) address in the HHHH.HHHH.HHHH for- mat.

VLANID The VID of the VLAN on the bridge <1-4094>.

4. Example:

The following example configures a bridge GROUP (1) to discard matching frames (MAC address 2222.2222.2222) in vlan VLANID (1):

switch_a(config)#bridge 1 address 2222.2222.2222 discard vlan 1 switch_a(config)#

Port Mirroring

1. Command Mode: Interface mode

Log on to Configure Mode (Configure Terminal Mode).

Then logon to Interface mode.

fe1 means port 1.

The switch_a(config-if)# prompt will show on the screen. switch_a(config)#interface fe1

switch_a(config-if)#

Page 138	724-746-5500 blackbox.com	LB308A
		LB308A