Black Box LB308A user manual Command Line Console Management

Chapter 6: Command Line Console Management

switch_a(config)#interface vlan1.1

switch_a(config-if)#

2. Usage:

Use ip igmp version command to set the current IGMP protocol version on an interface.

To return to the default version, use the no ip igmp version command.

3. Command Syntax:

ip igmp version VERSION

no ip igmp version

VERSION IGMP protocol version number.

4. Example:

The following example sets the IGMP protocol version 3 on vlan1.1:

switch_a(config)#interface vlan1.1

switch_a(config-if)#ip igmp version 3

switch_a(config-if)#

Fast-leave:

1. Command Mode: Interface mode

Logon to Configure Mode (Configure Terminal Mode).

Then logon to Interface mode.

vlan1.1 means vlan 1.

The switch_a(config-if)# prompt will show on the screen.

switch_a(config)#interface vlan1.1

switch_a(config-if)#

2. Usage:

Use ip igmp snooping fast-leave command to enable IGMP Snooping fast-leave processing. Fast-leave processing is analogous to immediate leave processing; the IGMP group-membership is removed, as soon as an IGMP leave group message is received without sending out a group-specific query.

Use the no ip igmp snooping fast-leave command to disable fast-leave processing.

Page 194 724-746-5500 blackbox.com LB308A