Black Box 8-port 10/100base-tx hardened ethernet extender switch Command Syntax show arp-table

Chapter 6: Command Line Console Management

switch_a(config)# ARP Table

1.Command Mode: Privileged Exec mode Logon to Privileged Exec Mode (Enable Mode). The switch_a# prompt will show on the screen. switch_a(config)#

2.Usage:

Use show arp-table command to view ARP Table.

3.Command Syntax: show arp-table

4.Example:

The following example shows the ARP Table of switch: switch_a#show arp-table

Route Table

1.Command Mode: Privileged Exec mode Logon to Privileged Exec Mode (Enable Mode). The switch_a# prompt will show on the screen. switch_a(config)#

2.Usage:

Use show route-table command to view Route Table.

3.Command Syntax: show route-table

4.Example:

The following example shows the Route Table of switch: switch_a#show route-table

Save Configuration

Load config from TFTP server:

1. Command Mode: Privileged Exec mode

LB308A 724-746-5500 blackbox.com Page 119