Black Box LB308A user manual Command Syntax no ntp enable

Chapter 6: Command Line Console Management

The switch_a(config-if)# prompt will show on the screen. switch_a(config)#interface vlan1.1 switch_a(config-if)#

2. Usage:

Use ip igmp snooping report-suppression command to enable report suppression for IGMP versions 1 and 2.

Use the no ip igmp snooping report-suppression command to disable report suppression.

3. Command Syntax:

(no) ip igmp snooping report-suppression

4. Example:

The following example enables report suppression for IGMPv2 reports on vlan1.1: switch_a(config)#interface vlan1.1

switch_a(config-if)#ip igmp version 2

switch_a(config-if)#ip igmp snooping report-suppression switch_a(config-if)#

NTP

NTP Status:

1. Command Mode: Configure mode

Logon to Configure Mode (Configure Terminal Mode). The switch_a(config)# prompt will show on the screen.

switch_a(config)#

2. Usage:

Use ntp enable command to enable NTP for the Hardened Ethernet Extender Switch.

Use no ntp enable command to disable NTP for the Hardened Ethernet Extender Switch.

3.Command Syntax: (no) ntp enable

Page 198 724-746-5500 blackbox.com LB308A