Chapter 6: Command Line Console Management
switch_a(config)#
Secret Key:
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode). The switch_a(config)# prompt will show on the screen.
switch_a(config)#
2. Usage:
Use this command to set the shared secret key between a Radius server and a client.
3. Command Syntax:
(no)
KEY specifies the secret key shared among the radius server and the 802.1x client.
4. Example:
The following example specifies the IP address (192.168.1.100) of the remote radius server host and set the secret key (ipi) shared among the radius server and the 802.1x client:
switch_a(config)#
Timeout:
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode). The switch_a(config)# prompt will show on the screen.
switch_a(config)#
2. Usage:
Use this command to specify the number of seconds an Hardened Ethernet Extender Switch waits for a reply to a radius request before retransmitting the request.
3. Command Syntax:
Page 178 |
| LB308A |
|
|
