A – Command Line Interface Create Command
S
The following is an example of the Create Support command and how to download the support file to your workstation. When prompted to send the support file to another machine, decline, then close the Telnet session. Open an FTP session on the switch and log in with the account name images and password images. Transfer the dump_support.tgz file in binary mode with the Get command.
SANbox xxxx (admin) #> create support
Log Msg:[Creating the support file - this will take several seconds] FTP the dump support file to another machine? (y/n): n
SANbox xxxx (admin) #> quit >ftp switch_ip_address
user: images
password: images
ftp>bin
ftp>get dump_support.tgz
xxxxxbytes sent in xx secs.
ftp>quit
The following is an example of the Create Certificate command:
SANbox | xxxx (admin) #> | create certificate | ||
The current | date | and | time is day mon date hh:mm:ss UTC yyyy. | |
This | is the | time | used to stamp onto the certificate. | |
Is the date | and time | correct? (y/n): [n] y | ||
Certificate | generation successful. | |||
