Manuals / Q-Logic / Computer Equipment / Switch

Q-Logic 5600 manual Table A-25. Snmp Configuration Settings

Models: 5600

1 336

Download 336 pages 25.61 Kb

Page 266

A – Command Line Interface Set Setup Command

S

snmp

Prompts you in a line-by-line fashion to change SNMP configuration settings. Table A-25describes the SNMP fields. For each parameter, enter a new value or press the Enter key to accept the current value shown in brackets.

Table A-25. SNMP Configuration Settings

Entry	Description

SNMPEnabled	Enables (True) or disables (False) SNMP on the switch. The
	default is True.
Contact	Specifies the name of the person to be contacted to respond to
	trap events. The name can be up to 64 characters excluding #,
	semicolon (;), and comma (,). The default is undefined.
Location	Specifies the name of the switch location. The name can be up
	to 64 characters excluding #, semicolon (;), and comma (,).
	The default is undefined.
Trap [1-5] Address	Specifies the workstation IP address to which SNMP traps are
	sent. The default address for trap 1 is 10.0.0.254. The default
	address for traps 2–5 is 0.0.0.0. Addresses, other than 0.0.0.0,
	for all traps must be unique.
Trap [1-5] Port	Specifies the workstation port to which SNMP traps are sent.
	Valid workstation port numbers are 1–65535. The default is
	162.
Trap [1-5] Severity	Specifies the severity level to use when monitoring trap events.
	The default is Warning.
Trap [1-5] Version	Specifies the SNMP version (1 or 2) to use in formatting traps.
	The default is 2.
Trap [1-5] Enabled	Specifies whether traps (event information) are enabled or dis-
	abled (default).
ReadCommunity	Read community password that authorizes an SNMP agent to
	read information from the switch. This is a write-only field. The
	value on the switch and the SNMP management server must
	be the same. The read community password can be up to 32
	characters excluding #, semicolon (;), and comma (,). The
	default is “public”.
WriteCommunity	Write community password that authorizes an SNMP agent to
	write information to the switch. This is a write-only field. The
	value on the switch and the SNMP management server must
	be the same. The write community password can be up to 32
	characters excluding #, semicolon (;), and comma (,). The
	default is “private”.

A-86	59097-02 B

Image 266

Q-Logic 5600 manual Table A-25. Snmp Configuration Settings

Contents

SANbox 5600 Series Switch Managment User’s Guide SANbox 5600 Series Switch Management User’s Guide Document Revision HistoryTable of Contents Section Managing Fabrics SANbox 5600 Series Switch Management User’s Guide Managing Switches SectionSANbox 5600 Series Switch Management User’s Guide Section Managing Ports Appendix a Command Line Interface Glossary Index List of Figures List of Tables SANbox 5600 Series Switch Management User’s Guide Jdom License Intended AudienceRelated Materials Introduction Jdom License Training Technical SupportAvailability Contact Information Support HeadquartersUsing SANsurfer Switch Manager Workstation Requirements Installing the Management ApplicationWorkstation Requirements SANsurfer Switch Manager SMS Installation for Windows SANsurfer Management SuiteChglax.bat SMS Installation for Linux SMS Installation for Solaris Locate and execute the file sbmoversms.sh Install the new SANsurfer Switch Manager packageChange directories to the package location Starting SANsurfer Switch Manager ‰ For Linux or Solaris enter the SANsurfer commandInitial Startup Dialog SANsurfer Switch Manager Window Exiting SANsurfer Switch Manager Save Default Fabric View File DialogUninstalling SANsurfer Switch Manager Load Default Fabric File DialogSMS Uninstall Standalone UninstallChanging the Encryption Key for the Default Fabric View File Saving and Opening Fabric View FilesSetting SANsurfer Switch Manager Preferences Using Online Help Viewing Software Version and Copyright InformationSANsurfer Switch Manager User Interface Faceplate DisplayMenu Bars Topology Display MenuFaceplate Display Menu Shortcut KeysTool Bar Tool Bar ButtonsFabric Tree Fabric TreeData Window and Tabs Working Status IndicatorGraphic Window Using the Topology Display Switch and Link StatusArranging Switches in the Display Working with Switches and LinksSelecting Switches and Links Opening the Faceplate and Topology Display Popup Menus Topology Data WindowsUsing the Faceplate Display 11. Faceplate DisplaySelecting Ports Port Views and StatusWorking with Ports Opening the Faceplate Popup Menu Faceplate Data WindowsPage Managing Fabrics Radius ServersAdding a Radius Server Add ServerManaging Fabrics Radius Servers Removing a Radius Server Remove ServerEditing Radius Server Information Edit Server InformationModifying Authentication Order Radius Server Information Modify Authentication Order Radius Server InformationFabric security consists of the following Securing a FabricConnection Security Security Consistency Checklist User Account SecurityDevice Security Edit Security Dialog Edit Security DialogCreating a Security Set Create Security Group Dialog Creating a Security GroupCreate Security Group Member Dialog Create a Security Group Member DialogManaging Fabrics Securing a Fabric Creating a Security Group Member Editing the Security Configuration on a Switch Using the Security Config Dialog Viewing Properties of a Security Set, Group, or MemberDeactivating a Security Set Archiving a Security Configuration to a FileActivating a Security Set Active Security Data Window Configured Security Data WindowFabric Services Enabling In-band Management Enabling Snmp ConfigurationClick the In-band Management Enable button Tracking Fabric Firmware and Software VersionsSaving a Version Snapshot Viewing and Comparing Version SnapshotsExporting Version Snapshots to a File Fabric Version Snapshot Analysis DialogManaging the Fabric Database Adding a FabricRemoving a Fabric Opening a Fabric View FileRediscovering a Fabric Deleting Switches and LinksSaving a Fabric View File Adding a New Switch to a Fabric Replacing a Failed Switch Displaying Fabric Information Topology Display Switch and Status Icons Fabric StatusDisplaying the Event Browser 11. Events BrowserEditor or browser Discarded when you close a SANsurfer Switch Manager sessionSeverity Levels Filtering the Event Browser 12. Filter Events DialogSorting the Event Browser Saving the Event Browser to a FileDevices Data Window Devices Data Window EntriesActive Zone Set Data Window 13. Active Zone Set Data WindowDisplaying Detailed Device Information Link Data WindowWorking with Device Information and Nicknames Creating a Nickname Exporting Device Information to a FileManaging Device Port Nicknames Exporting Nicknames to a File Editing a NicknameDeleting a Nickname Zoning Concepts Importing a Nicknames FileZoning a Fabric Zones Soft ZonesZone Sets Access Control List Hard ZonesAliases Zoning Database Viewing Zoning Limits and PropertiesUsing the Zoning Wizard Managing the zoning database consists of the following Managing the Zoning DatabaseEditing the Zoning Database Edit Zoning Dialog Tool Bar Buttons and Icons Edit Zoning Dialog Tool Bar Buttons and Icons Configuring the Zoning Database Interop Auto SaveSaving the Zoning Database to a File Default VisibilityDiscard Inactive Restoring the Zoning Database from a FileRestoring the Default Zoning Database Removing All Zoning DefinitionsManaging Zone Sets Creating a Zone SetRemoving a Zone from a Zone Set or from All Zone Sets Activating and Deactivating a Zone SetCopying a Zone to a Zone Set Managing zones involves the following Removing a Zone SetManaging Zones Creating a Zone in a Zone Set Adding Zone Members Removing a Zone from a Zone Set Renaming a Zone or a Zone SetRemoving a Zone Member Removing a Zone from All Zone SetsCreating an Alias Changing Zone TypesManaging Aliases Adding a Member to an Alias Removing an Alias from All ZonesMerging Fabrics and Zoning Zone Merge FailureZone Merge Failure Recovery Managing Fabrics Zoning a Fabric 59097-02 B Managing Switches Managing User Accounts Factory User AccountsUser Account Administration Dialog Add Account Creating User AccountsUser Account Administration Dialog Remove Account Removing a User AccountChanging a User Account Password User Account Administration Dialog Change PasswordUser Account Administration Dialog Modify Account Modifying a User AccountDisplaying Switch Information Faceplate Display Switch InformationSwitch Data Window Switch Data Window EntriesRatov Switch Data Window Entries Ing Detailed Device Information on page 3-36for infor Port Statistics Data Window Port Information Data WindowConfigured Zonesets Data Windows Configured Zonesets Data WindowConfiguring Port Threshold Alarms Port Threshold Alarm Configuration DialogPaging a Switch Port Threshold Alarm ExampleSetting the Date/Time and Enabling NTP Client Resetting a SwitchSwitch Resets Type DescriptionConfiguring a Switch Using the Configuration WizardSwitch Properties Symbolic NameSwitch Administrative States Switch Administrative StatesDomain ID and Domain ID Lock Fabric Device Management Interface Broadcast Support In-band ManagementAdvanced Switch Properties 10. Advanced Switch Properties DialogInterop Mode for Zoning Legacy Port Address FormatTimeout Values Timeout ValuesSystem Services Dialog 11. System Services DialogSecurity Consistency Checklist Dialog Network Properties 12. Network Properties DialogIP Configuration IP Configuration ParametersRemote Logging NTP ClientSnmp Properties 13. Snmp Properties DialogSnmp Configuration Snmp Configuration ParametersSnmp Trap Configuration Snmp Trap Configuration ParametersManaging Switch Stacks 14. Switch StacksSyslog 15. Syslog DialogArchiving a Switch Select Source DialogRestoring a Switch 16. Restore Dialogs Full and SelectiveManaging Switches Restoring a Switch Restoring the Factory Default Configuration Factory Default Configuration SettingsFactory Default Configuration Settings Upgrading the Switch Using License Keys Downloading a Support File17. Features License Key Dialog Installing Firmware Displaying Hardware Status 19. Hardware Status LEDsManaging Switches Displaying Hardware Status 59097-02 B Managing Ports Displaying Port InformationPort Types Monitoring Port StatusDisplaying Port Types Port Operational States Displaying Port Operational StatesDisplaying Port Speeds Port SpeedsDisplaying Transceiver Media Status Port Transceiver Media ViewPort Statistics Data Window Entries LIP ALPD,ALPS Port Statistics Data Window Entries Port Information Data Window Entries Port Information Data Window Entries Configuring Ports Port Properties DialogChanging Port Administrative States Port Administrative StatesChanging Port Speeds Changing Port Types Device Scan Changing Port Symbolic NameStream Guard Using the Extended Credits Wizard Resetting a Port Designate Donor PortsTesting Ports Port Loopback Test DialogManaging Ports Testing Ports Graphing Port Performance Fabric View GraphsThis section describes how to do the following Starting SANsurfer Performance ViewerSave Default Performance View File Dialog Exiting SANsurfer Performance ViewerLoad Default View File Dialog Saving and Opening Performance View FilesChanging the Default Performance View File Encryption Key Setting SANsurfer Performance Viewer PreferencesSetting the Polling Frequency Displaying Graphs for a SwitchDisplaying Graphs for a Stack Arranging Graphs in the DisplayDefault Graph Options Dialog Customizing GraphsManaging Ports Graphing Port Performance Printing Graphs Setting Global Graph TypeRescaling a Selected Graph Saving Graph Statistics to a FileCommand Line Interface Logging On to a SwitchWorking with Switch Configurations User AccountsModifying a Configuration Backing up and Restoring Switch Configurations Ftp ipaddress userimages password images ftp bin Commands Table A-1. Command-Line CompletionTable A-2. Commands Listed by Authority Level Admin Session CommandsSyntax Admin CommandAuthority KeywordsKeywords add alias memberlist Alias CommandSyntax alias Copy aliassource aliasdestinationMembers alias Delete aliasList Remove alias memberlistCIM Command Following is an example of the CIM Limits command CIMListener Command Table A-3. CIM Listener Configuration ParametersEdit listenername URLSyntax cimsubscription CIMSubscription CommandTable A-4. CIM Subscription Configuration Parameters Keywords create subscriptionnameEdit subscriptionname Keywords activate configname Config CommandSyntax config Save configname Edit confignameRestore #ftp symbolicname or ipaddress user images Keywords certificate Create CommandSyntax create certificate support SupportLocal directory now /itasca/conf/images bin Following is an example of the Create Certificate command SANbox xxxx admin # create supportKeywords MMDDhhmmCCYY Date CommandSyntax date Keywords add licensekey Feature CommandSyntax feature LogSyntax firmware install Firmware Install CommandAuthority Admin Group Command Syntax groupKeywords add group Table A-5. ISL Group Member AttributesTable A-6. Port Group Member Attributes Copy groupsource groupdestination Configures security for attachments to other switchesTable A-7. MS Group Member Attributes Create group typeEdit group member Table A-8. Group Member AttributesRename groupold groupnew Members groupRemove group memberlist Securitysets groupFollowing is an example of the Group Edit command ISLFollowing is an example of the Group List command Following is an example of the Group Members commandHardreset Command SyntaxCommand Help CommandHelp command keyword KeywordHistory History CommandFollowing is an example of the History command Hotreset Command HotresetSyntax image Image CommandKeywords cleanup Ftp Ftp switchname Wait for the unpack to complete Following is an example of the Lip command Lip CommandAdmin session Lip portnumberPasswd Command Syntax passwd accountname Keywords accountnamePing ipaddress Ping CommandFollowing is an example of a successful Ping command IpaddressAuthority None Syntax ps Ps CommandExamples The following is an example of the Ps command Displays current system process informationCloses the Telnet session Quit CommandAuthority None Syntax quit, exit, or logoutKeywords config configname Reset CommandSyntax reset FactoryRadius ServicesSwitch SecurityTable A-9. Switch Configuration Defaults ValuesTable A-10. Port Configuration Defaults Parameter 4-Gbps Port DefaultsTable A-11. Port Threshold Alarm Configuration Defaults Table A-12. Zoning Configuration Defaults Table A-13. Snmp Configuration DefaultsTable A-14. Radius Configuration Defaults Table A-15. Services Configuration DefaultsTable A-16. System Configuration Defaults Table A-17. Security Configuration DefaultsSecurity Command Keywords activeEdit Following is an example of the Security History command MD5Following is an example of the Security Limits command Following is an example of the Security List commandSecurityset Command Delete securityset Create securitysetDeactivate Groups securitysetFollowing is an example of the Securityset Groups command Following is an example of the Securityset List commandConfig option Set CommandKeywords alarm option Syntax setLog option Setup optionSwitch state Pagebreak stateTimezone Table A-18. Set Config Port Parameters Set Config CommandSet config Port portnumberSend Arbff True instead of IDLEs False on the loop Table A-18. Set Config Port Parameters Table A-19. Security Configuration Parameters Table A-20. Set Config Switch ParametersResource Allocation Timeout Value. The number Table A-21. Set Config Threshold Parameters ThresholdTable A-22. Set Config Zoning Parameters Following is an example of the Set Config Port command ArbffEnter key to do so Configuring Port Number AdminState Following is an example of the Set Config Security command Following is an example of the Set Config Switch commandFollowing is an example of the Set Config Threshold command Following is an example of the Set Config Zoning command Archive Set Log CommandSet log Component filterlistDisplay filter Level filter Port portlistStop Alarms are always logged and always displayed on the screenStart Stops logging of eventsSet Port Command Disables the port by removing power from the port lasers State stateRadius Services Snmp System Set Setup CommandSet setup Configuration fieldsTable A-23. Radius Service Settings Table A-24. Switch Services Settings Table A-24. Switch Services Settings Table A-25. Snmp Configuration Settings Table A-26. System Configuration Settings Table A-26. System Configuration Settings Following is an example of the Set Setup Services command Following is an example of the Set Setup Snmp command Following is an example of the Set Setup System command Show Command Keywords aboutCimsubscription subscriptionname Alarm optionCimlistener listenername Log option Fdmi portwwnInterface LsdbTable A-27. Show Port Parameters PagebreakPerf option Lipalpdalps Post log Steering domainidTable A-28. Switch Operational Parameters Displays all connected devices Displays the current time zone settingTopology UsersFollowing is an example of the Show Fdmi command Following is an example of the Show Domains commandFollowing is an example of the Show Fabric command Following is an example of the Show Fdmi WWN command Following is an example of the Show NS local domain commandFollowing is an example of the Show Interface command Following is an example of the Show NS domainID commandFollowing is an example of the Show NS portID command Following is an example of the Show Port command PL-XPL-VC-SG3-22Following is an example of the Show Switch command Following is an example of the Show Topology command59097-02 B 105 Following is an example of the Show Version command Show Config Command Show configFollowing is an example of the Show Config Port command Following is an example of the Show Config Switch command Following is an example of the Show Config Threshold command Following is an example of the Show Config Zoning commandShow log Show Log CommandNone Keywords numberofeventsDisplays all critical events Snmp eventsDisplays all informative events Displays all warning events Displays all events related to EPortsOptions SettingsLevel PortFollowing is an example of the Show Log command Show Perf Command Errors portnumber Outframe portnumberFollowing is an example of the Show Perf Byte command Mfg Show Setup CommandShow setup Following is an example of the Show Setup Services command Following is an example of the Show Setup Radius commandFollowing is an example of the Show Setup Snmp command Following is an example of the Show Setup System command Shutdown Command Syntax shutdownSyntax test Test CommandPort portnumber testtype cancel Status Keywords port portnumber testtypeCancels the online test in progress StatusTest port x online Authority None Syntax uptime Uptime CommandExamples The following is an example of the Uptime command Keywords accounts User CommandSyntax user AddFollowing is an example of the User Edit command Following is an example of the User Accounts commandFollowing is an example of the User Add command Following is an example of the User Delete command Following is an example of the User List commandAuthority None Syntax whoami Whoami CommandExamples The following is an example of the Whoami command Keywords add zone memberlist Zone CommandSyntax zone Copy zonesource zonedestinationRemove zone memberlist Delete zoneMembers zone Rename zoneold zonenewFollowing is an example of the Zone Members command Following is an example of the Zone Zonesets command Zoneset Command Syntax zonesetRename zonesetold zonesetnew Delete zonesetRemove zoneset zonelist Zones zonesetFollowing is an example of the Zoneset Zones command Zoning Command Opens a Zoning Edit sessionTable A-29. Zoning Database Limits Limit DescriptionFollowing is an example of the Zoning Limits command E2JBOD2Following is an example of the Zoning List command Command Line Interface Zoning Command 142 59097-02 B Alarm Access Control List ZoneAdministrative State BootPDefault Visibility Class 3 ServiceConfigured Zone Sets Fabric Management SwitchMaintenance Button Input Power LEDInter-Switch Link Maintenance ModeTarget Small Form-Factor Pluggable Zoning DatabaseSoft Zone User AccountIndex Index-2 59097-02 B 59097-02 B Index-3 Index-4 59097-02 B 59097-02 B Index-5 Index-6 59097-02 B 59097-02 B Index-7 Index-8 59097-02 B 59097-02 B Index-9 Index-10 59097-02 B