Q-Logic 5600 manual Create Security Group Dialog, Creating a Security Group

3 – Managing Fabrics Securing a Fabric

S

3.2.4.3

Create Security Group Dialog

Use the Create Security Group dialog, shown in Figure 3-6, to add a security group to a security set. The Create Security Group dialog is displayed after clicking the Security Group button on the toolbar, or after you right-click on a security set in the graphic window and select Create a Security Group from the popup menu.

Figure 3-6. Create Security Group Dialog

The naming conventions for all security groups are listed below.

„Must start with a letter

„All alphanumeric chars [aA- zZ] [0-9]

„The symbols $ _ - and ^ are the only symbols allowed

3.2.4.4

Creating a Security Group

An empty (no members) security group in the active security set will prevent all connections for that security group type. For example, an empty ISL security group will cause the switch to refuse all logins from other switches. To add a security group to a security set, do the following:

1.On the faceplate display, click the Security button on the toolbar, or open the Security menu and select Edit Security to open the Edit Security dialog.

2.Choose one of the following methods to open the Create a Security Group dialog:

„In the graphic window, click a security set and click the Security Group button in the toolbar.

„Right-click on a security set and select Create a Security Group from the popup menu.

3-12 59097-02 B