Q-Logic 5600 manual Table A-6. Port Group Member Attributes

A – Command Line Interface Group Command

S

	Table A-6. Port Group Member Attributes
Attribute		Description
Member	Port worldwide name for the N_Port device that would attach to the
	switch. A member cannot belong to more than one group.
Authentication	Enables (CHAP) or disables (None) authentication using the Chal-
	lenge Handshake Authentication Protocol (CHAP). The default is
	None.
Primary Hash	The preferred hash function to use to decipher the encrypted Pri-
	mary Secret sent by the Port group member. The hash functions are
	MD5 or SHA-1. If the Port group member does not support the Pri-
	mary Hash, the switch will use the Secondary Hash.
Primary Secret	Hexadecimal string that is encrypted by the Primary Hash for
	authentication with the Port group member. The string has the fol-
	lowing lengths depending on the Primary Hash function:
	„	MD5 hash: 16-byte
	„	SHA-1 hash: 20-byte
Secondary Hash	Hash function to use to decipher the encrypted Secondary Secret
	sent by the Port group member. Hash values are MD5 or SHA-1.
	The Secondary Hash is used when the Primary Hash is not avail-
	able on the Port group member. The Primary Hash and the Second-
	ary Hash cannot be the same.
Secondary	Hex string that is encrypted by the Secondary Hash and sent for
Secret	authentication. The string has the following lengths depending on
	the Secondary Hash function:
	„	MD5 hash: 16-byte
	„	SHA-1 hash: 20-byte

A-28 59097-02 B