Q-Logic 5600 manual Following is an example of the Set Config Threshold command

A – Command Line Interface Set Config Command

S

The following is an example of the Set Config Threshold command:

SANbox	xxxx	#> admin	start
SANbox	xxxx	(admin)	#> config edit
SANbox	xxxx	(admin-config) #> set config		threshold
A list	of attributes		with formatting and	current values will follow.
Enter a new		value or	simply press the ENTER key to		accept the current value.

If you wish to terminate this process before reaching the end of the list

press 'q' or 'Q' and the ENTER	key to do so.
ThresholdMonitoringEnabled	(True / False)	[False	]
CRCErrorsMonitoringEnabled	(True / False)	[True	]
RisingTrigger	(decimal value, 1-1000)	[25	]
FallingTrigger	(decimal value, 0-1000)	[1	]
SampleWindow	(decimal value, 1-1000 sec)	[10	]
DecodeErrorsMonitoringEnabled	(True / False)	[True	]
RisingTrigger	(decimal value, 1-1000)	[200	]
FallingTrigger	(decimal value, 0-1000)	[0	]
SampleWindow	(decimal value, 1-1000 sec)	[10	]
ISLMonitoringEnabled	(True / False)	[True	]
RisingTrigger	(decimal value, 1-1000)	[2	]
FallingTrigger	(decimal value, 0-1000)	[0	]
SampleWindow	(decimal value, 1-1000 sec)	[10	]
LoginMonitoringEnabled	(True / False)	[True	]
RisingTrigger	(decimal value, 1-1000)	[5	]
FallingTrigger	(decimal value, 0-1000)	[1	]
SampleWindow	(decimal value, 1-1000 sec)	[10	]
LogoutMonitoringEnabled	(True / False)	[True	]
RisingTrigger	(decimal value, 1-1000)	[5	]
FallingTrigger	(decimal value, 0-1000)	[1	]
SampleWindow	(decimal value, 1-1000 sec)	[10	]
LOSMonitoringEnabled	(True / False)	[True	]
RisingTrigger	(decimal value, 1-1000)	[100	]
FallingTrigger	(decimal value, 0-1000)	[5	]
SampleWindow	(decimal value, 1-1000 sec)	[10	]
Finished configuring attributes.
This configuration must be saved (see config save command) and
activated (see config activate	command) before it can take effect.

To discard this configuration use the config cancel command.

A-74 59097-02 B