Q-Logic 5600 manual Table A-21. Set Config Threshold Parameters

A

A – Command Line Interface Set Config Command

threshold

Initiates a configuration session by which to generate and log alarms for selected events. The system displays each event, its triggers, and sampling window one line at a time and prompts you for a value. For each parameter, enter a new value or press the Enter key to accept the current value shown in brackets. These parameters must be saved in a configuration and activated before they will take effect. Refer to the ”Config Command” on page A-17for information about saving and activating a configuration. Table A-21describes the Set Config Threshold parameters. The switch will down a port if an alarm condition is not cleared within three consecutive sampling windows (by default 30 seconds). Reset the port to bring it back online. An alarm is cleared when the threshold monitoring detects that the error rate has fallen below the falling trigger.

Table A-21. Set Config Threshold Parameters

Parameter		Description
Threshold Monitoring Enabled	Master enable/disable parameter for all events.
	Enables (True) or disables (False) the generation
	of all enabled event alarms. The default is False.
CRCErrorsMonitoringEnabled	The event type enable/disable parameter.
DecodeErrorsMonitoringEnabled	Enables (True) or disables (False) the generation
	of alarms for each of the following events:
ISLMonitoringEnabled
	„	CRC errors
LoginMonitoringEnabled
	„	Decode errors
LogoutMonitoringEnabled
	„	ISL connection count
LOSMonitoringEnabled
	„	Device login errors
	„	Device logout errors
	„ Loss-of-signal errors
Rising Trigger	The event count above which a rising trigger
	alarm is logged. The switch will not generate
	another rising trigger alarm for that event until
	the count descends below the falling trigger and
	again exceeds the rising trigger.
Falling Trigger	The event count below which a falling trigger
	alarm is logged. The switch will not generate
	another falling trigger alarm for that event until
	the count exceeds the rising trigger and
	descends again below the falling trigger.
Sample Window	The period of time in seconds in which to count
	events.

59097-02 B A-69