C. Configuring RAID set in RAID BIOS

Enter the RAID BIOS setup utility to configure a RAID array. Skip this step if you do not want to create RAID.

Step 1:

After the POST memory test begins and before the operating system boot begins, look for a message which says "Press <Ctrl-F> to enter FastBuild (tm) Utility" (Figure 2). Hit the <Ctrl>+<F> key to enter the RAID BIOS setup utility.

RAID Option ROM Version 3.0.1540.47

(c) 2008 Advanced Micro Devices, Inc. All rights reserved. No Array is defined..

Press <Ctrl-F> to enter FastBuild (tm) Utility...

Figure 2

Step 2:

Main Menu

This is the first option screen when you enter the BIOS RAID Setup utility. (Figure 3).

To view the disk drives assigned to arrays, press <1> to enter the View Drive Assignments window. To create an array, press <2> to enter the Define LD window.

To delete an array, press <3> to enter the Delete LD window.

To view controller settings, press <4> to enter the Controller Configuration window.

Option ROM Utility (c) 2008 Advanced Micro Devices, Inc.

[ Main Menu ]

View Drive Assignments

[ 1 ]

Define LD

[ 2 ]

Delete LD

[ 3 ]

Controller Configuration

[ 4 ]

[ Keys Available

]

Press 1..4 to Select Option

[ESC] Exit

Figure 3

- 75 -

Appendix

Page 75
Image 75
Gigabyte GA-MA770T-UD3P user manual Configuring RAID set in RAID Bios, Main Menu