Gigabyte GA-MA770T-UD3P user manual

Step 4:

Press <Esc> and then <Enter> to exit Q-Flash and reboot the system. As the system boots, you should see the new BIOS version is present on the POST screen.

Step 5:

During the POST, press <Delete> to enter BIOS Setup. Select Load Optimized Defaults and press <Enter> to load BIOS defaults. System will re-detect all peripherals devices after a BIOS update, so we recommend that you reload BIOS defaults.

CMOS Setup Utility-Copyright (C) 1984-2009 Award Software

	MB Intelligent Tweaker(M.I.T.)	Load Fail-Safe Defaults
	Standard CMOS Features	Load Optimized Defaults
	Advanced BIOS Features	Set Supervisor Password
	Integrated Peripherals	Set User Password
		Load Optimized Defaults (Y/N)? Y
	Power Management Setup	Save & Exit Setup
	PC Health Status	Exit Without Saving
ESC: Quit		: Select Item	F11: Save CMOS to BIOS
F8: Q-Flash		F10: Save & Exit Setup	F12: Load CMOS from BIOS

Load Optimized Defaults

Press <Y> to load BIOS defaults

Step 6:

Select Save & Exit Setup and then press <Y> to save settings to CMOS and exit BIOS Setup. The procedure is complete after the system restarts.

GA-MA770T-UD3P Motherboard - 66 -