Q-Logic 5600 manual Changing Port Types

A

5 – Managing Ports Configuring Ports

5.2.3

Changing Port Types

The ports can be configured to self-discover the proper type to match the device or switch to which it is connected. Table 5-9describes the port types.

To change the port type, do the following:

1.Select one or more ports in the faceplate display.

2.Open the Port menu and select Port Properties or Port Properties 10G to open the Port Properties dialog.

3.Click the Port Type radio button for the port type you want.

4.Click the OK button to write the new port type to the switch.

	Table 5-9. Port Types
State	Description
F_Port	Fabric port - Supports a single public device (N_Port).
FL_Port	Fabric loop port - Self discovers a single device (N_Port) or a loop of up
	to 126 public devices (NL_Port). 1/2/4-Gbps ports only.
G_Port	Generic port - Self discovers as an F_Port or an E_Port.
GL_Port	Generic loop port - Self discovers as an F_Port, FL_Port, or an E_Port.
	GL_Port is the default port type. A single device on a public loop will
	attempt to configure as an F_Port first, then if that fails, as an FL_Port.
	1/2/4-Gbps ports only.
Donor	Donor port - Allows buffer credits to be used by another port. 1/2/4-Gbps
	ports only.

59097-02 B 5-13