2 – Using SANsurfer Switch Manager Installing the Management Application

S

4.In the Operating System column, click the Solaris SPARC link.

5.Click the SANsurfer Management Software link to open the Save As dialog.

6.Enter a path name to save the sansurfer_solaris_install.bin file and click the Save button.

7.Open a terminal window for the directory in which the

sansurfer_solaris_install.bin file was saved, and enter the following: chmod +x sansurfer_solaris_install.bin

8.Execute the install program and follow the installation instructions:

./sansurfer_solaris_install.bin

9.When the installation is complete, start SANsurfer Management Suite using the SANsurfer file in the installation directory. Click the Switch tab from the left pane to open SANsurfer Switch Manager. From the Help menu, select About ... and make note of the release version number. Close SANsurfer Management Suite.

10.To ensure that you are using the most recent version of SANsurfer Switch Manager, visit the QLogic support web page and go to Drivers, Software and Manuals.

a.Select your switch model from the pull-down menu. Locate the description for SANsurfer Switch Manager for Linux under "Management Software".

b.If the release version number (5.00.xx) is greater than what is currently installed on your workstation, down load the new version. Otherwise, no upgrade is needed.

11.Open the tar file and save the SANsurferSwitchMgr_QLGCsol_5.00.xx.bin file in a folder and make the file executable.

#chmod +x sansurferswitchmgr_QLGCsol_5.00.xx

12.Install the new SANsurfer Switch Manager package:

#pkgadd -d sansurferswitchmgr_QLGCsol_5.00.xx

13.Change directories to the package location:

#cd /usr/opt/QLGCsol/bin

14.Locate and execute the file sbm_over_sms.sh:

#./sbm_over_sms.sh

15.When prompted for the SMS installation directory, enter d if SMS was installed in it’s default directory (/opt/QLogic_Corporation/SANsurfer). Otherwise, enter the path name for the SMS installation directory. The script will copy the necessary files to the specified installation directory.

16.Restart SANsurfer Switch Manager from SANsurfer Management suite as you did in step 9 and confirm that the new version is running.

2-8

59097-02 B

Page 24
Image 24
Q-Logic 5600 manual Install the new SANsurfer Switch Manager package, Change directories to the package location