Q-Logic 5600 manual Security Command, Keywords active

A – Command Line Interface Security Command

S

Security Command

Opens a Security Edit session in which to manage the security database on a switch. Refer to the ”Group Command” on page A-26and the ”Securityset Command” on page A-58.

Authority Admin session. The keywords Active, History, Limits, and List are available without an Admin session.

Syntax security active cancel clear edit history limits list restore save

Keywords active

Displays the active security set, its groups, and group members. This keyword does not require an Admin session.

cancel

Closes a Security Edit session without saving changes. Use the Edit keyword to open a Security Edit session.

clear

Clears all inactive security sets from the volatile edit copy of the security database. This keyword does not affect the non-volatile security database. However, if you enter the Security Clear command followed by the Security Save command, the non-volatile security database will be cleared from the switch.

NOTE: The preferred method for clearing the security database from the switch is the Reset Security command. Refer to the ”Reset Command” on page A-46.

A-54 59097-02 B