Q-Logic 5600 manual Following is an example of the Security Limits command

A

A – Command Line Interface Security Command

The following is an example of the Security Limits command:

SANbox xxxx #> security limits
Security Attribute	Maximum	Current	[Name]
------------------	-------	-------	------
MaxSecuritySets	4	1
MaxGroups	16	2
MaxTotalMembers	1000	19
MaxMembersPerGroup	1000	4	group1
		15	group2

The following is an example of the Security List command:

SANbox xxxx (admin-security) #> security list

SB211.192 #> security list
Active Security Information
SecuritySet	Group	GroupMember
-----------	-----	-----------
No active securityset defined.
Configured Security		Information
SecuritySet	Group	GroupMember
-----------	-----	-----------
alpha	group1 (ISL)
		10:00:00:00:00:10:21:16
		Authentication	Chap
		Primary Hash	MD5
		Primary Secret	********
		Secondary Hash	SHA-1
		Secondary Secret	********
		Binding	0
		10:00:00:00:00:10:21:17
		Authentication	Chap
		Primary Hash	MD5
		Primary Secret	********
		Secondary Hash	SHA-1
		Secondary Secret	********
		Binding	0

59097-02 B A-57