Q-Logic 5600 manual Create securityset, Deactivate, Delete securityset, Groups securityset

A

A – Command Line Interface Securityset Command

create [security_set]

Creates the security set with the name given by [security_set]. A security set name must begin with a letter and be no longer than 64 characters. Valid characters are 0-9, A-Z, a-z, _, $, ^, and -. The security database supports a maximum of 4 security sets.

deactivate

Deactivates the active security set. Close the Security Edit session before using this keyword.

delete [security_set]

Deletes the security set given by [security_set]. If the specified security set is active, the command is suspended until the security set is deactivated.

groups [security_set]

Displays all groups that are members of the security set given by [security_set]. This keyword is available without an Admin session.

list

Displays a list of all security sets. This keyword is available without an Admin session.

remove [security_set] [group]

Removes a group given by [group] from the security set given by [security_set]. If [security_set] is the active security set, the group will not be removed until the security set has been deactivated.

rename [security_set_old] [security_set_new]

Renames the security set given by [security_set_old] to the name given by [security_set_new].

Notes Refer to the ”Group Command” on page A-26for information about creating and managing groups.

Examples The following is an example of the Securityset Active command

SANbox xxxx #> securityset active Active SecuritySet Information

------------------------------

ActiveSecuritySet alpha LastActivatedBy Remote LastActivatedOn day month date time year

59097-02 B A-59