Q-Logic 5600 Displays the current time zone setting, Topology, Displays all connected devices

A

A – Command Line Interface Show Command

Table A-28. Switch Operational Parameters (Continued)

Parameter	Description
PendingImageVersion - build date	Firmware image version and build date
	that is pending. This image will become
	active at the next reset or power cycle.
ActiveConfiguration	Name of the switch configuration that is in
	use.
AdminState	Switch administrative state
AdminModeActive	Admin session status
BeaconOnStatus	Beacon status as set by the Set Beacon
	command.
OperationalState	Switch operational state
PrincipalSwitchRole	Principal switch status. True indicates that
	this switch is the principal switch.
BoardTemp (1) - Degrees Celsius	Internal switch temperature at circuit board
	sensor 1
SwitchDiagnosticsStatus	Results of the power-on self test
SwitchTemperatureStatus	Switch temperature status: normal, warn-
	ing, failure

timezone

Displays the current time zone setting.

topology

Displays all connected devices.

users

Displays a list of logged-in users. This is equivalent to the User List command.

version

Displays an introductory set of information about operational attributes of the switch. This keyword is equivalent to the About keyword.

59097-02 B A-99