Q-Logic 5600 manual Table A-24. Switch Services Settings

A – Command Line Interface Set Setup Command

S

services

Prompts you in a line-by-line fashion to enable or disable switch services.

Table A-24describes the switch service parameters. For each parameter, enter a new value or press the Enter key to accept the current value shown in brackets.

NOTE: Use caution when disabling TelnetEnabled and GUIMgmtEnabled; it is possible to disable all Ethernet access to the switch.

	Table A-24. Switch Services Settings
Entry		Description
TelnetEnabled		Enables (True) or disables (False) the ability to manage
		the switch over a Telnet connection. Disabling this service
		is not recommended. The default is True.
SSHEnabled		Enables (True) or disables (False) Secure Shell (SSH)
		connections to the switch. SSH secures the remote con-
		nection to the switch. To establish a secure remote connec-
		tion, your workstation must use an SSH client. The default
		is False.
GUIMgmtEnabled		Enables (True) or disables (False) out-of-band manage-
		ment of the switch with SANsurfer Switch Manager, the
		SANsurfer Switch Manager Application Programming Inter-
		face, SNMP, and CIM. If this service is disabled, the switch
		can only be managed inband or through the serial port.
		The default is True.
SSLMgmtEnabled		Enables (True) or disables (False) secure SSL connections
		for management applications including SANsurfer Switch
		Manager, the SANsurfer Switch Manager web applet,
		SANsurfer Switch Manager Application Programming Inter-
		face, and the CIM server. The default is False.
		„ To enable secure SSL connections, you must first syn-
		chronize the date and time on the switch and worksta-
		tion.
		„ This service must be enabled to authenticate users
		through a RADIUS server.
		„ Enabling SSL automatically creates a security certifi-
		cate on the switch.
		„ To disable SSL when using a user authentication
		RADIUS server, the RADIUS server authentication
		order must be local.

A-84 59097-02 B