HP J7949E manual TCP/IP Settings 2, Ttl/Slp

Table 4.1	TCP/IP Settings (2 of 3)
Item		Description
Primary WINS		Specifies the IP address of the primary Windows Internet Naming
Server		Service (WINS) server. The WINS server provides IP address
		and name resolution services for network computers and devices.
Secondary WINS		Specifies the IP Address to be used for WINS if the primary WINS
Server		Server is unavailable.
Syslog Server		Specifies the IP address of a host computer that is configured to
		receive syslog messages from the HP Jetdirect print server. If a
		Syslog Server is not specified, syslog messages are disabled.
		For more information, see Appendix A.
Syslog Maximum		Specifies the maximum number of syslog messages that can be
Messages		sent by the HP Jetdirect print server on a per-minute basis. This
		setting allows administrators to control the log file size. The
		default is 10 per minute. If set to zero, no maximum number is
		defined.
Syslog Priority		Controls the filtering of syslog messages that are sent to the
		syslog server. The filter range is 0 to 8, with 0 being the most
		specific and 8 being the most general. Only messages that are
		lower than the filter level specified (that is, higher in priority) are
		reported. The default value is 8 which reports all syslog
		messages. A value of zero effectively disables syslog reporting.
Idle Timeout		Specifies the number of seconds that an idle connection is
		allowed to remain open. Up to 3600 seconds can be set. 270 is
		the default value. If set to 0, the timeout is disabled and TCP/IP
		connections will remain open until closed by the device at the
		other end of the network (for example, a workstation).
TTL/SLP		Specifies the IP multicast Time To Live (TTL) discovery setting
		for Service Location Protocol (SLP) packets. The default value is
		4 hops (the number of routers from the local network). The range
		is 1-15. If set to -1, multicast capability is disabled.
		For print servers configured for Auto IP (link-local) addresses, this
		field will be ignored. TTL on outbound packets will always be set
		to 255 and limited to the link-local network.

ENWW Using the Embedded Web Server 97