HP J7949E manual For HP-UX systems, substitute lp -dfor lpr -P

10.Click OK and select Exit from the List menu.

11.Select Exit Sam.

Note	By default, the lpsched is not running. Make sure
	you turn the scheduler on when you set up your
	print queues.

Printing a Test File

To verify that the printer and print server connections are correct, print a test file.

1.At the UNIX system prompt type: lpr -Pprinter_name file_name

where printer_name is the designated printer and file_name refers to the file to be printed.

Examples (for BSD-based systems):

Text File: lpr -Ptext1 textfile

PCL File: lpr -Praw1 pclfile.pcl

PostScript File: lpr -Praw1 psfile.ps

HP-GL/2 File: lpr -Praw1 hpglfile.hpg

For HP-UX systems, substitute lp -dfor lpr -P.

2.To get print status, type the following at the UNIX prompt: lpq -Pprinter_name

where printer_name is the designated printer. Examples (for BSD-based systems):

lpq -Ptext1 lpq -Praw1

For HP-UX systems, substitute lpstat for lpq -Pto get print status.

This completes the process for configuring the HP Jetdirect print server to use LPD.

ENWW Configuring for LPD Printing 141