HP J7949E manual Authorization, Admin. Account

Authorization

The Authorization page provides tabs that allow you to control access to the device, as well as to device configuration and management features. In addition, you may configure certificates for client and server authentication.

Admin. Account

Use this page to set an administrator password for controlled access to Jetdirect configuration and status information. The administrator password is shared by Jetdirect configuration tools, such as the embedded Web server, Telnet, and HP Web Jetadmin. In addition, for applicable printers, the password is shared with the printer (see Printer Password Synchronization below).

If a password is set and you attempt to access Jetdirect print server settings, you will be prompted for a user name and this password before you are allowed access.

Note	The administrator password may be cleared by a
	cold reset of the print server, which resets the print
	server to factory default settings.

A checkbox allows you to synchronize HP Web Jetadmin and the SNMP v1/v2c Set Community Name.If you enable this feature (the checkbox is checked), the administrator password will also be used as the SNMP Set Community Name for SNMP v1/v2c management applications.

Note	If you subsequently change the SNMP Set
	Community Name (for example, using the SNMP
	tab on the Network Settings page or from Web
	Jetadmin), the two settings will no longer be
	synchronized.

ENWW Using the Embedded Web Server 117