HP J7949E manual Wizard Security Levels 1, Security Level Description

Table 4.7	Wizard Security Levels (1 of 2)
Security Level		Description
Basic Security		This option requires that you configure an administrator
		password for configuration management. The administrator
		password is shared with other management tools, such as
		Telnet and SNMP applications. However, some
		management tools, such as Telnet, use plain-text
		communications and are not secure.
		The Administrator Account page is used to enter the
		administrator password. The Administrator Password will
		also be used as the SNMP v1/v2 Set Community Name for
		SNMP management applications.
		The Configuration Review page displays all the current
		settings that may affect security. Click Finish to set your
		basic security selections.
Enhanced Security		This option adds to Basic Security by automatically
(Recommended)		disabling management protocols that are do not use secure,
		encrypted communications (such as Telnet and FTP
		firmware updates, RCFG, SNMP v1/v2c). To change
		individual protocol settings, see Mgmt. Protocols.
		The Administrator Account page is used to enter the
		administrator password.
		SNMP Configuration pages are used to configure specific
		SNMP settings:
		● Enable SNMPv3: (Full-featured print servers only)
		Enable SNMP v3 and create an SNMP v3 account.
		Creating an SNMP v3 account is not recommended if
		you manage devices using HP Web Jetadmin. See
		SNMP.
		● Enable SNMPv1/v2 read-only access: Enable this
		option to allow support of current tools that rely on SNMP
		v1/v2 for device discovery and status.
		The Configuration Review page displays all the current
		settings that may affect security. Click Finish to set your
		basic security selections.

ENWW Using the Embedded Web Server 115