HP J7949E Certificate Configuration Screens 4, Install Certificate, or Install CA Certificate

Table 4.8 Certificate Configuration Screens (4 of 4)

Install Certificate, or

Install CA Certificate

Use the Install Certificate screen to install a Jetdirect certificate.

Use the Install CA Certificate screen to install a trusted Certificate Authority (CA) certificate for use during EAP authentication.

Install a PEM/Base64 (Privacy Enhanced Mail) encoded certificate.

To install a certificate, specify the name and path of the file that contains the certificate. Or, click Browse to browse your system for the file.

Click Finish to complete the installation.

To install a certificate, it must be associated with a pending certificate request by the embedded Web server. The Install Certificate option will not be presented if there is no pending request.

A Jetdirect or CA certificate size is limited to 3 KBytes.

Import Certificate and Private Key

Use this screen to import a Jetdirect certificate and private key.

Import a Jetdirect certificate and private key. When imported, the existing certificate and private key will be overwritten.

The file format must be PKCS#12 encoded (.pfx) and cannot exceed 4 KBytes.

To import a certificate and private key, specify the name and path of the file that contains the certificate and private key. Or, click Browse to browse your system for the file. Then enter the password that was used to encrypt the private key.

Click Finish to complete the installation.

Export the Jetdirect certificate and private key

Use this screen to export the installed Jetdirect certificate and private key to a file.

To export a certificate and private key, enter a password that will be used to encrypt the private key. You must enter the password again to confirm it. Then click Save As to save the certificate and private key in a file on your system. The file format will be PKCS#12 encoded (.pfx).

ENWW Using the Embedded Web Server 123