HP J7949E manual Firmware Upgrades, Firmware Installation Tools

Firmware Upgrades

Hewlett-Packard offers downloadable firmware upgrades for the HP Jetdirect print server. The upgrades are available from the World Wide Web at:

http://www.hp.com/go/webjetadmin_firmware

Firmware Installation Tools

Firmware upgrades for supported HP Jetdirect print servers may be installed over a network using one of the following firmware installation tools:

●HP Jetdirect Download Manager (Windows). HP Jetdirect Download Manager can be downloaded from HP online support at:

http://www.hp.com/go/dlm_sw

●HP Web Jetadmin may be used on supported systems. For more information on HP Web Jetadmin, visit:

http://www.hp.com/go/webjetadmin/

●Using a Web browser, the networking pages of the embedded Web server provide a firmware upgrade feature using your Web browser. For more information see Chapter 4.

●FTP (File Transfer Protocol) may be used to transfer a firmware upgrade image file to the print server. To start an FTP session, use the device IP address or host name. If a password is set, it must be entered to log into the device. After user login, typical FTP commands to upgrade the device are illustrated below:

ftp> bin ftp> hash

ftp> cd /download

ftp> put <firmware image filename; specify full pathname> ftp>######### <Wait for FTP to complete the download> ftp> bye

ENWW Introducing the HP Jetdirect Embedded Print Server 11