HP J7949E AppleTalk Settings, Be followed by a number to indicate that it is a duplicate

AppleTalk

The AppleTalk tab allows you to configure selected AppleTalk settings on the HP Jetdirect print server. See Table 4.3 for a description of items on this page.

Note	The AppleTalk parameters displayed include the
	AppleTalk printer types that are advertised on
	the network.
	The HP Jetdirect print server supports AppleTalk
	Phase 2 only.

Table 4.3	AppleTalk Settings
Item		Description
AppleTalk Enable		Enable (check) or disable (clear) the AppleTalk protocol on the
checkbox		print server. If AppleTalk is enabled, AppleTalk parameters
		stored on the print server are displayed.
Device		Specify the name of the printer on the AppleTalk network. If you
(AppleTalk) Name		enter a name that is already assigned on your network, the
		AppleTalk name specified on the Jetdirect configuration page will
		be followed by a number to indicate that it is a duplicate.
Print Type		Identify the type of printer being advertised on the network. Up
		to two types can be displayed (for example, HP LaserJet and
		LaserWriter).
Zone		Select an available AppleTalk network zone for the printer. By
		default, the zone currently selected will be displayed.
		Click the Refresh selected zone Info button to refresh the list
		of available zones.

DLC/LLC

Using the checkbox provided, you can enable (check) or disable (clear) the DLC/LLC (Data Link Control/Logical Link Control) protocols on the HP Jetdirect print server. If the checkbox is clear, DLC/LLC protocols are disabled.

ENWW Using the Embedded Web Server 101