HP J7949E manual Telnet Commands and Parameters 3

Table 3.4 Telnet Commands and Parameters (3 of 13)

subnet-mask	A value (in dotted notation) that identifies the network and
	host portions of an IP address in received messages. For
	example,
	subnet-mask 255.255.255.0
	stores the subnet mask value 255.255.255.0 on the print
	server. The value 0.0.0.0 disables the subnet mask. For
	more information see Appendix A.
default-gw	The IP address of a default gateway, in dotted notation.
	For example,
	default-gw 192.168.40.1
	assigns 192.168.40.1 as the IP address of the default
	gateway for the print server.
	Note: If the HP Jetdirect print server is configured by DHCP
	and you manually change the subnet mask or the default
	gateway address, you should manually change the print
	server’s IP address. This will release the DHCP-assigned
	address back to the DHCP IP address pool.
Config Server	(Read-only parameter) The IP address of the server (such
	as a BOOTP or DHCP server) that last configured the IP
	address on the HP Jetdirect print server.
TFTP Server	(Read-only parameter) The IP address of the TFTP server
	that provided TFTP parameters to the HP Jetdirect print
	server.
TFTP Filename	(Read-only parameter) The path and TFTP filename on the
	TFTP server. For example,
	hpnp/printer1.cfg
domain-name	The domain name for the device. For example,
	domain-name support.hp.com
	assigns support.hp.com as the domain name.
	The domain name does not include the host name; it is not
	the Fully Qualified Domain Name (such as
	printer1.support.hp.com).
pri-dns-svr	IP address of the primary DNS (Domain Name System)
	server.
sec-dns-svr	IP address of a secondary DNS server to use if the primary
	DNS server is unavailable.
pri-wins-svr	The IP address of the primary Windows Internet Name
	Service (WINS) server, in dotted notation.
sec-wins-svr	The IP address of the secondary Windows Internet Name
	Service (WINS) server, in dotted notation.

ENWW TCP/IP Configuration 75