HP J7949E manual Tftp Configuration File Parameters 1

Table 3.3 TFTP Configuration File Parameters (1 of 10)

General

passwd:

(passwd-admin:)

A password (up to 16 alphanumeric characters) that allows administrators to control changes of HP Jetdirect print server configuration parameters through Telnet, HP Web Jetadmin, or embedded Web server. The password may be cleared by a cold reset.

sys-location:

(host-location:, location:)

Identifies the physical location of the printer (SNMP sysLocation object). Only printable ASCII characters are allowed. The maximum length is 64 characters. The default location is undefined. (Example: 1st floor, south wall)

sys-contact:

(host-contact:, contact:)

ASCII character string (up to 64 characters) that identifies the person who administers or services the printer (SNMP sysContact object). This may include how to contact this person. The default contact is undefined.

ssl-state:

Sets the print server’s security level for Web communications:

1 (default): Forced redirection to the HTTPS port. Only HTTPS (secure HTTP) communications can be used.

2:Disable forced redirection to HTTPS. Both HTTP and HTTPS communications can be used.

security-reset:

Reset security settings on the print server to factory default values. 0 (default) does not reset, 1 resets the security settings.

tftp-parameter-attribute:

Specifies whether TFTP parameters can be manually overwritten on the print server (for example, through Telnet) after it has been configured by TFTP.

tftp-ro (default): Do not allow TFTP parameters to be manually changed, and always overwrite manual configurations.

tftp-rw: Allow TFTP parameters to be manually changed, and always overwrite manual configurations.

manual-ro: Do not allow TFTP parameters to overwrite manually configured parameters.

ENWW TCP/IP Configuration 46