HP 3400CL-24G manual ProCurveconfig# Snmp-server mib hpswitchauthmib excluded, Snmp Communities

Enhancements

Release M.08.89 Enhancements

For example, to disable SNMP access to the switch’s authentication MIB and then display the result in the Excluded MIB field, you would execute the following two commands.

ProCurve(config)#	snmp-server mib hpswitchauthmib excluded
ProCurve(config)#
	show snmp-server
SNMP Communities			This command disables
			SNMP security MIB access.
Community Name	MIB View	Write Access
----------------	--------	------------
public	Manager	Unrestricted

Trap Receivers

Link-Change Traps Enabled on Ports [All] : All

Send Authentication Traps [No] : No

Address	Community	Events Sent in Trap
----------------------	----------------	-------------------

Excluded MIBs

hpSwitchAuthenticationMIB

Indicates that SNMP security MIB access is disabled, which is the nondefault setting.

Figure 10. Disabling SNMP Access to the Authentication MIB and Displaying the Result

An alternate method of determining the current Authentication MIB access state is to use the show run command.

37